wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 211,650 times.
Learn more...
For small home or office networks with only a few computers and light print usage, a USB printer is a good choice that can be shared among all computers. There are some benefits to print sharing using a USB printer instead of a network printer. USB printers usually cost less than networked printers and are more compact. A USB printer can be shared either through a Windows computer or a USB server, which is inexpensive and usually easy to set up, but requires its own network jack.
Steps
-
1Click on the Windows start button and navigate to settings, control panel, printers. Right click on the printer to be shared.
-
2Select "change sharing options" if network and print sharing has not already been enabled. Follow the prompts to allow sharing.Advertisement
-
3Check the button next to "share this printer." Enter a share name for the printer. This is the name that other users on the network will see when searching for printers. Limit the name to 8 letters with no characters or spaces.
-
4Select "additional drivers" if there are other computers on the network with older Windows operating systems. Follow the prompts to install drivers for these computers. This will save time since the drivers won't have to be downloaded and installed separately on the other computers.
-
5Follow the same steps to get to the printers setting on the other computer. Right click "add printer" and select "network printer." Allow Windows to search the network for printers. If the printer isn't found automatically, select "the printer I want is not listed." Select "browse for printers" and find the computer that is attached to the USB printer. Click the plus sign to expand it, and then select the printer.
-
1Check the system requirements for the USB server before purchasing it. Make sure it is compatible with the operating systems of all computers on the network and with the USB printer.
-
2Locate the server near a network wall jack. Plug an RJ45 Ethernet cable into the server on one end and the network wall jack on the other.
-
3Read the directions for the USB server. Follow the proper order for plugging in power, network and USB connections.
-
4Go to each computer to add the printer. Navigate to the printers folder. Right click "add printer" and select "network printer."
-
5Allow Windows to search the network for printers. If a printer is not found, select "the printer I want is not listed." Select "browse for printers" and find the USB server that is attached to the USB printer. Click the plus sign to expand it, and then select the printer. Follow the prompts to install the printer.
Warnings
- The Windows firewall or other installed firewalls may block access to the printer from other computers. Be sure to configure the firewall to allow traffic to the printer. Follow the instructions from the firewall vendor.⧼thumbs_response⧽
- The instructions here show how to share a USB printer using Windows Vista. Older versions of Windows use similar steps to configure USB print sharing; all sharing and adding is done through the "printers" section of the control panel.⧼thumbs_response⧽
