S-video cables offer enhanced picture-quality on older television sets. They come with a series of pins at the end (either 4, 7, or 9) that plug into a circular slot. To properly use S-video cables, you'll need to choose the correct cable for your television / component pair, then connect the two properly.

Part 1
Part 1 of 2:

Choosing the Correct S-Video Cable

  1. 1
    Make sure your television and component support S-video. S-video cables connect a component (something that generates video, like a DVD player) with a screen (like your television).
    • S-video input slots are circular with several small holes clustered around the middle of the port. Both your component and your TV must have S-video inputs for you to use S-video cables.
  2. 2
    Count the small holes in your TV and component S-video slots. This will determine which specific S video cable to buy and whether or not you will need an adapter.
    • S video inputs can be either 4, 7, or 9 pin.
    • If your component S-video input has 7 holes (a 7-pin configuration) and your TV S-video input has 4 holes (a standard 4-pin configuration), for example, you'll need a 4-pin to 7-pin adapter.
    Advertisement
  3. 3
    Purchase your S-video cable. S-Video cables tend to be much cheaper than their high-definition counterparts.
    • A gold-plated connector won't oxidize over time (unlike a silver- or copper-plated connector), so while buying a more expensive cable won't affect your picture quality, it may make for longer cable life.
    • High-quality cables are usually cheaper online than in a store. Amazon, Walmart, and Best Buy are reputable online providers.
  4. 4
    Purchase any necessary adapters at the same time.
    • If you have multiple components that need connecting, such as a VCR and a receiver, purchase an "S-video cable splitter" in addition to more S-video cables. Splitters should cost around $5.[1]
  5. Advertisement
Part 2
Part 2 of 2:

Connecting Your S-video Cable

  1. 1
    Turn off your TV. If you try to swap out cables with your TV on, you can damage your set.
  2. 2
    Unplug any video input from your TV. Your TV quality can suffer from having too many video inputs plugged in at once so it's best to start with zero.
  3. 3
    Plug one end of your S-video cable into your component. The S-video slot is round with a series of small round holes clustered around the middle, to match the number of pins on your S-video cable. The small pins on the cable should go in the top of the input.
    • If your TV requires a different number of pins than your component (or vice versa), count the pins first to make sure you're plugging in the correct end of the cable.
  4. 4
    Plug the other end of your S-video cable into your TV. Use an adapter if your setup requires it.
  5. 5
    Make sure your audio cables are attached. These could be red and white composite cables (in which case leave the yellow video cable unplugged) or a higher-end setup.
  6. 6
    Turn on your component(s). Your DVD player (for instance) should be fully on before you turn on your TV.
  7. 7
    Turn on your TV. If your DVD video appears, you plugged in the S-video cable properly!
    • You may have to switch your TV's default input channel after changing to S-video. To do this, press the "Input" or "Source" button on your TV or TV remote.
  8. Advertisement

Community Q&A

  • Question
    Is there a way to run S-video through another device and then into your TV if you do not have it on your TV?
    Community Answer
    Community Answer
    If you do not have an S-video input in your TV (for example, perhaps you only have composite input) but your DVD player does have an S-video output, you can purchase a converter to match the input (in the case of our example, you would need an S-video to composite adapter). There are converters for pretty much any kind of cable TO any kind of cable you can imagine, so this should be applicable to most scenarios.
  • Question
    I have a new flat screen TV but an old SNES system. The SNES systems has a (female) s-video cable, but my flat screen TV has no place to put the s-video cable in. I'm trying to buy a converter, but where on the TV would I plug it into?
    Community Answer
    Community Answer
    You can purchase an S-video to HDMI converter for around $30, and you probably have an HDMI cable that came standard with your TV (though you can also purchase one of these for under $20). You would then plug one end of the S-video cable into your SNES system, and the other into the converter. Then you would plug one end of the HDMI cable into the pertinent slot on the converter, and the other end would plug into the HDMI slot on your TV. This same methodology should work for any cable type.
  • Question
    Can I connect a computer (USB) to TV (S-video)?
    Community Answer
    Community Answer
    Some laptops or video cards have s-video. If this isn't the case, get a VGA or HDMI to s-video converter to use for your TV.
Advertisement

Warnings

  • Be gentle when unplugging you cables. It's easy to put a kink in a wire or damage the head of a cable.
    ⧼thumbs_response⧽
Advertisement

About This Article

Jack Lloyd
Written by:
wikiHow Technology Writer
This article was co-authored by wikiHow staff writer, Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 276,103 times.
How helpful is this?
Co-authors: 18
Updated: January 4, 2021
Views: 276,103
Categories: Television
Advertisement