Offset smokers may look intimidating, but they're easy to use once you learn how to regulate the heat. Light briquettes and dump them in the firebox to get the smoker started. Add your food to the cooking chamber and then maintain a low temperature as the food smokes. Adjust the vents and add more coals to keep the fire going. Consider adding moisture or flavored woods to make your food really stand out.

Part 1
Part 1 of 3:

Starting the Offset Smoker

  1. 1
    Season the smoker if necessary. If you're using a new offset smoker, wipe down the entire smoker with soapy water. Rinse the smoker to wash away any dust, grease, or shavings. Let the smoker dry and then spritz vegetable oil over the inside of the cooking chamber. Open all of the vents on the smoker and light a fire in the firebox. Burn a fire for 30 minutes with the vents open.[1]
    • Let the fire die out and cool the smoker to use another time. Or use the smoker once it's burned hot for 30 minutes.
  2. 2
    Set two temperature probes in the smoker. Buy two digital air probes that you can insert into the cooking chamber. Place one probe near your food at each end of the cooking chamber for the most accurate readings. Use probes attached to wires if you'd like to be able to move them, or mount the probes onto the grates of the cooking chamber.[2]
    • Avoid relying on the built-in thermometer at the top of the smoker's lid. This thermometer measures the temperature that's on top of the grill instead of the space where your food is smoking.
    Advertisement
  3. 3
    Open the air intake vent and chimney vent. Since fire needs oxygen, open the air intake vent on the side of the firebox. You'll also need to open the vent on the chimney, so smoke can be released.[3]
    • The vents can also be called dampers or baffles. You'll adjust these during the smoking process to regulate heat and smoke within the smoker.
  4. 4
    Light a chimney full of briquettes. Fill a chimney starter full of charcoal briquettes and light them. Heat the briquettes until they begin to glow and ash over. This should take about 15 minutes.[4]
  5. 5
    Spread the coals in the firebox and close the lid. Once the briquettes are lightly ashy and hot, dump them into the firebox. If you want to add flavor to the smoke, include one or two logs of hardwood--the options include hickory, mesquite, apple, and maple. Close the lid on the firebox and cooking chamber.[5]
    • Avoid making the fire completely with wood because it's hard to regulate and maintain over a long period of time.
  6. 6
    Bring the smoker up to temperature. Monitor the temperature inside the cooking chamber until it gets as hot as you'd like. Most people prefer to smoke food between 225 °F (107 °C) and 275 °F (135 °C). Keep the firebox and cooking chamber doors closed while you're preheating the smoker.[6]
  7. Advertisement
Part 2
Part 2 of 3:

Adding the Food and Adjusting the Heat

  1. 1
    Arrange your food on the grill grate. Place the food you want to smoke on the racks in the cooking chamber. If you like, put cold meat directly into the smoker without bringing it to room temperature first since it will absorb more smoke when it's cold. Close the lid of the cooking chamber.[7]
  2. 2
    Add briquettes to the firebox to maintain the fire. If you need to maintain the heat in the smoker or bring it higher, add unlit charcoal briquettes to the firebox. Use a grill hoe to scoot the ashy coals to one side to make room for half a chimney full of new briquettes on the other side.[8]
    • You'll need to check the temperature and firebox every 30 minutes or so to ensure that the fire is still going.
  3. 3
    Increase the heat in the smoker, if necessary. If the temperature inside the cooking chamber is dropping or stalling and you've already added new briquettes, add a log of wood to the firebox. Open the air intake vent on the side of the firebox to really get the fire going nice and hot. For an extreme increase in temperature, you can also open the chimney vent. Close the vents as soon as the smoker is at the right temperature.[9]
    • Keep an eye on the smoker temperature while the vents are open. You'll only need to keep the vents open for one to two minutes to bring the heat up.
  4. 4
    Reduce the temperature in the smoker, if necessary. If the temperature inside the cooking chamber is getting too hot, ensure that the vents are closed. If the temperature is still high, open the cooking chamber lid for about a minute. This will drop the temperature quickly.[10]
  5. Advertisement
Part 3
Part 3 of 3:

Smoking Flavorful Food

  1. 1
    Add a few wood chunks to the firebox. Place 1 to 2 large chunks of wood for smoking into the firebox every hour or so. Set the wood next to the fire, so it smolders instead of burns quickly. Avoid using wood chips because these will burn off too quickly.[11]
    • Use hardwoods, fruitwoods, or nutwoods to get the best flavored smoke for your food.
    • You don't need to soak the wood since the moisture might cool off the coals in the firebox.
  2. 2
    Rotate the food once an hour. Every hour, open the cooking chamber lid and use tongs to move the food. Turn the food so that pieces at the cooler side of the cooking chamber are moved nearer to the firebox.[12]
    • If you're smoking a single, large piece of meat, it's still important to rotate the meat so it smokes evenly.
  3. 3
    Place a pan of water in the firebox. If you're worried that your food will dry out over a long smoking session, introduce moisture into the firebox. Set a metal rack over the coals in the firebox. Fill a disposable aluminum pan with water and set the pan on the rack. The smoke will become moist before it flows into the cooking chamber.[13]
  4. 4
    Spray the food to keep it moist. Add moisture by spraying the food with apple juice, water, or beer. Fill a clean spray bottle with your liquid and spritz the food towards the end of the smoking session. Spritz the food when it starts to look dry. Spray the food every 15 minutes or so by the end of the smoking session.[14]
  5. Advertisement

Community Q&A

  • Question
    You say to spread the charcoal around the firebox, but your picture shows the person spreading the charcoal around the cooking chamber. Is it necessary to put charcoal in the cooking chamber?
    Community Answer
    Community Answer
    No, only if you want to.
Advertisement

Things You'll Need

Starting the Offset Smoker

  • Soapy water and cloths
  • Vegetable oil
  • Spray bottle
  • Wood or charcoal briquettes
  • 2 digital air probes
  • Chimney starter

Adding the Food and Adjusting the Heat

  • Grill hoe
  • Charcoal briquettes or wood

Smoking Flavorful Food

  • Hardwoods, fruitwoods, or nutwoods
  • Disposable aluminum pan
  • Metal rack
  • Spray bottle

About This Article

Jessica Gibson
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Jessica Gibson. Jessica Gibson is a Writer and Editor who's been with wikiHow since 2014. After completing a year of art studies at the Emily Carr University in Vancouver, she graduated from Columbia College with a BA in History. Jessica also completed an MA in History from The University of Oregon in 2013. This article has been viewed 69,443 times.
34 votes - 85%
Co-authors: 5
Updated: March 29, 2019
Views: 69,443
Article SummaryX

To use an offset smoker, start by opening the air intake and chimney vents, so air can get in and smoke can get out. Next, light a chimney full of briquettes and heat them for 15 minutes, or until they begin to glow and ash over. As soon as the briquettes are hot, put them in the firebox, and start monitoring the temperature in the cooking chamber. When it reaches between 225-275°F, put the food you’re smoking on the grill and close the lid. Make sure you check the temperature every 30 minutes, so you can add briquettes to maintain the heat if necessary. For tips on how to adjust the vents on your offset smoker to control the cooking temperature, scroll down!

Did this summary help you?
Advertisement