The Rubik's Cube can be very frustrating and may seem next to impossible to restore to its original configuration. However, once you know a few algorithms, it is very easy to solve. The method described in this article is the Layer by Layer method also known as the Beginner's Method: first, you solve one face of the cube (first layer), then the middle layer, and finally the last layer.

Part 1
Part 1 of 4:

First Layer

  1. 1
    Familiarize yourself with the Notations at a later step in the article.
  2. 2
    Choose one face to start with. The most common face for beginners to start with is the white face. In the examples that will follow, the color for the first layer is white. It’s important to note that starting with a color other than white can be confusing if you are just starting. This is because you will have to imagine different colors in place of the ones in this article.
    Advertisement
  3. 3
    Image titled Cube_FLm1cross_correct_585.png
    Solve the cross. Find the side with the white square in the center and put it on top. Set into position the four edge pieces that contain white. The color that the edges have must line up with both the white center and the center on the sides of the cube. The cross only needs a maximum of eight moves to become solved. (five or six in general).
    • If you put a white edge piece in the correct place but it is flipped around, then try popping it out of the top layer and reinserting it correctly.
    • If you are really struggling, then put the white edge pieces next to the yellow center instead and then rotate each edge piece above its correct center, bringing it down so it is now next to the white center instead.
    • Place the cross at the bottom. Turn the cube over 180° so that the cross is now on the bottom.
  4. 4
    Solve the four corners of the first layer, one by one. You should also be able to place the corners without needing algorithms. To get you started, here is an example of one corner being solved:
    • There are some algorithms if you cannot do it intuitively yet. Try turning the cube so the white is facing up again, and check to see which direction the corner points. If it faces right, you can do R’ D’ R. If it faces you, you can do D’ R’ D R. If it faces down, you can do F L D2 L’ F’.
    • Another common method for solving a corner is to have it above the slot it needs to go in and repeat R U R’ U’ until it is solved.
    • At the end of this step, the first layer should be complete, with a solid color (in this case, white) at the bottom.
  5. 5
    Verify your first layer is correct. You should now have the first layer complete and look like this (from the bottom side):
  6. Advertisement
Part 2
Part 2 of 4:

Middle Layer

  1. 1
    Place the four edges of the middle layer. Those edge pieces are the ones that do not contain yellow in our example. You need to know only one algorithm to solve the middle layer. The second algorithm is symmetrical to the first.
  2. 2
    Verify correct positioning. Your cube should now have the first two layers complete and look like this (from the bottom side) :
  3. Advertisement
Part 3
Part 3 of 4:

Last Layer

  1. 1
    Permute the corners. At this step, our goal is to place the corners of the last layer in their correct position, regardless of their orientation.
  2. 2
    Orient the corners. Locate each top color facelet of the corners (yellow in our case). You need to know only one algorithm to orient the corners:
    (3.a)
  3. 3
    Permute the edges. You will need to know only one algorithm for this step. Check whether one or several edges are already in the proper position (the orientation does not matter at this point).
  4. 4
    Orient the edges. You will need to know two algorithms for that last step :
    Dedmore "H" Pattern
    (5)
    Dedmore "Fish" Pattern
    (6)
  5. 5
    Congratulations! Your cube should now be solved.
  6. Advertisement
Part 4
Part 4 of 4:

Notations

  1. 1
    This is the key to the notations used.
    • The pieces that compose the Rubik's Cube are called Cubies, and the color stickers on the cubes are called facelets.
    • There are three types of Cubies:
      • The centers (or center pieces), at the center of each face of the Cube. There are six of them, each have one facelet, they always stay in the same place relative to each other.
      • The corners (or corner pieces), at the corners of the Cube. There are eight of them, and each have three facelets
      • The edges (or edge pieces), between each pair of adjacent corners. There are 12 of them and each have 2 facelets
    • Not all cubes have the same color schemes. The colors used for these illustrations is called BOY (because the Blue, Orange and Yellow faces are in clockwise order). Examine the positions of the centers relative to each other, as this is always your color scheme.
      • White opposes yellow;
      • Blue opposes green;
      • Orange opposes red;
      • Orange is to the right of blue if white is facing up.
  2. 2
  3. 3
  4. 4
    When a facelet is grey, it means that its color is not important at the moment.
  5. 5
    The arrows (blue or red) show what the algorithm will do. In the case of the algorithm (3.a) for instance, it will rotate the three corners on themselves as shown. If the yellow facelets are as drawn on the picture, at the end of the algorithm they will be on top.

    • The axis of the rotation is the big diagonal of the cube (from one corner to the corner all the way on the other side of the cube).
    • Blue arrows are used for clockwise turns (algorithm (3.a)).
    • Red arrows are used for counter-clockwise turns (algorithm (3.b), symmetrical to (3.a)).
  6. 6
  7. 7
    For the move notations it is important to always look at the cube from the front side.
  8. Advertisement

Community Q&A

  • Question
    How long does it typically take to solve a Rubik's cube?
    Community Answer
    Community Answer
    If you are just starting out, aim to get down to two to three minutes. Then once you get some practice, go below two minutes. That is around where you should get after a few days of practice. Always try to be faster though -- the world record is 6.54 seconds!
  • Question
    What is the fastest way to solve a Rubik's cube?
    Community Answer
    Community Answer
    The "layer method" described here is intended for beginners. There are faster methods that are more difficult to learn, the Fridrich method being the most popular among world-class speedcubers.
  • Question
    I'm seeing blue squares where the diagram shows yellow, but everything else is the same. What should I do?
    Community Answer
    Community Answer
    Japanese-style Rubik's cubes reverse the position of the blue and yellow faces compared to Western-style Rubik's cubes. Follow the instruction as though these colors were switched on your cube.
Advertisement

References

  1. http://www.speedcubing.com/f2l.html (Algorithms > First two layers)
  2. http://lar5.com/cube/
  3. http://www.speedcubing.com/finallayer.html (Algorithms > Final layer)
  4. Speedcubing.com - algorithms, videos, cube solvers, world records and ranking.
  5. Beginner Solution to the Rubik's Cube.
  6. Solution for solving the Rubik's Cube step by step illustrated method.
  7. Petrus Method illustrated with java animations.

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 18,191,807 times.
624 votes - 43%
Co-authors: 107
Updated: March 15, 2023
Views: 18,191,807
Article SummaryX

Solving a Rubik's cube is a difficult skill that will take time to master, so it's important not to get discouraged when you begin. Start by learning the notation that is used to describe the moves you will perform and the sides of the cube. You should also learn the different types of pieces on the cube: edge pieces, corner pieces, and center pieces. By identifying patterns and applying specific sequences of moves, you will be able to solve the cube layer by layer. Start with the edges and corners of the first layer, and then solve the edges of the second layer. Next, orient and then permute the pieces of the last layer. With practice, you will be able to solve the cube in less than a minute using this method. If you want to learn how to read Rubik's cube notations, keep reading the article!

Did this summary help you?
Advertisement