Concrete garden ornaments come in a variety of shapes and sizes. There are benches, animals, gnomes, statues and bird baths. People place them in their yards, flower beds and gardens out in the weather elements. Staining and painting a garden ornament will allow it to stand up to the elements over time without as much wear and tear. This is how to paint concrete garden ornaments.

Steps

  1. 1
    Wash the garden ornament with clear water. Do not use soap. Spray the garden ornament using a hose with a spray nozzle attached.
  2. 2
    Brush away any loose flakes using a dry scrub brush, or use an air sprayer.[1]
    Advertisement
  3. 3
    Place the garden ornament on a turn table to make the painting process easier.
  4. 4
    Apply concrete stain to the garden ornament as a protective base coat.[2] Concrete is porous and demands some kind of primer before painting.
  5. 5
    Paint the garden ornament with latex paints in colors of your choice.[3]
  6. 6
    Dry the garden ornament for 24 hours before proceeding.
  7. 7
    Apply a non-yellowing exterior latex sealer to the entire garden ornament.
  8. 8
    Dry the garden ornament for 24 hours before moving it to its ideal location.
  9. Advertisement

Community Q&A

  • Question
    Where can I buy small tins of paint to paint concrete garden ornaments?
    Community Answer
    Community Answer
    You can buy small tins of paint to concrete garden ornaments in craft stores.
  • Question
    Is a varnish coat the same as exterior latex sealer?
    Community Answer
    Community Answer
    No - varnish or urethane are not latex products and use mineral spirits of some kind to clean up. They would generally be OK to use over the latex paint, but test a small sample to see if there will be a reaction to the different paint types. Expect about a 2-year lifespan for an exterior varnish or urethane product.
  • Question
    Do I need to seal new garden stone ornaments before putting them into the garden?
    T. Chinsen
    T. Chinsen
    Top Answerer
    The materials in a garden stone ornament are made to be kept outside. There is no need to seal them unless you want to paint them a particular color.
Advertisement

Warnings

  • Bird baths and fountains should be drained of water when freezing temperatures are forecast. If they are not drained, no amount of paint or stain will keep them from cracking or breaking.
    ⧼thumbs_response⧽
  • All staining, painting and sealing should be done outdoors or in a well ventilated area.
    ⧼thumbs_response⧽
  • Concrete garden ornaments may settle over time, and those with legs may develop cracks from stress.
    ⧼thumbs_response⧽
  • Do not begin this process until the garden ornament has been out of its mold and had a chance to set for at least 3 weeks or, even better, 30 days.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Concrete Garden Ornament
  • Hose
  • Spray Nozzle
  • Air Sprayer
  • Scrub Brush
  • Paint Brush
  • Concrete Stain
  • Latex Paints (in chosen colors)
  • Latex Sealer
  • Dishwashing Detergent

About This Article

Andre Kazimierski
Co-authored by:
Painting Specialist
This article was co-authored by Andre Kazimierski. Andre Kazimierski is a Painting Specialist and the Founder and CEO of Improovy, an on-demand house painting service startup. With more than 15 years of experience, Andre and the Improovy team use data and technology to streamline the home improvement process for homeowners and painting contractors. Andre started in the painting industry as a sophomore at Depaul University in Chicago, working with one of the nation’s largest painting companies to launch new cities and territories across the Midwest. Years later, he started 3rd Gen Painting and Remodeling and had a successful exit after growing the company to two different states. This article has been viewed 80,209 times.
How helpful is this?
Co-authors: 10
Updated: January 15, 2023
Views: 80,209
Categories: Garden Crafts
Advertisement