How to Grow Your Own Christmas Tree

Co-authored by Matt Bowman

Last Updated: October 9, 2021

A Christmas tree can take a long time to grow - often over a decade. Growing your own Christmas tree can take time but in the end, you will have a greener and more fragrant tree than one purchased at a Christmas tree vendor. Planted Christmas trees are good for the wildlife around the planting site, keep the soil stable, and can be used as mulch once the holidays are over.^{[1]
X
Research source}

Part 1

Part 1 of 3:

Selecting and Starting Your Seedling

1
Know when to choose a fir transplant. Firs are popular Christmas trees, as they have a fragrant scent, rich coloring and retain their needles well. Firs grow best on northern or eastern slopes in areas that have cooler climates or higher elevation. There are several types of firs, all with their applicable zone growth areas.^{[2]
X
Research source} Firs also tend to hold up better in the home, whereas pines and spruces often dry out faster.^{[3]
X
Expert Source

Matt Bowman
Gardener & Owner, Tradition Market & Garden
Expert Interview. 21 April 2020.}
- Fraser Fir: Found in the Appalachians Mountains at high elevations (zones 4-7)
- Douglas Fir: The most popular Christmas tree species in the U.S. (zones 4-6)
- Concolor Fir: Also known as the White Fir (zones 4-7)
- Balsam Fir: This is the best fir for colder climates (zones 3-6)
- Noble Fir: This is the largest native fir in North America (zones 4-5)
2
Go for a pine seedling. Pines tend to grow quickly and can reach a height of 6 to 7 feet within six years as long as they have good growing conditions. They grow best on southern or western slopes. There are several types of pines, including:^{[4]
X
Research source}
- White Pine: This is the tallest native pine species in North America (zones 3-8)
- Virginia Pine: This pine does well in poor soil and has sharp cones (zones 4-8)
- Scotch Pine: This pine has a high reseeding ability and can thrive in poor soil (zone 3-7)
- Sand Pine: This pine is ideal for hot climates (zones 7-10)
Advertisement
3
Consider a spruce transplant. Spruce trees are bright and colorful, but they have prickly needles and tend to lose their needles after a week or two once they are harvested. Spruces grow well on northern or eastern slopes in areas with cooler climates. There are two main types of spruce:^{[5]
X
Research source}
- Norway Spruce: This spruce can be found throughout North America but is native to Europe (zones 2-7)
- Colorado Blue Spruce: This spruce type is known for its blue-green needles (zone 4 to 7a)
4
Go for a Leyland cypress. A non-traditional tree species like the Leyland cypress can create a unique Christmas tree for your home. Leyland cypresses also require very little shaping and can reach 6 to 7 feet tall in four years.^{[6]
X
Research source}
5
Grow the seedling in a pot first. To grow a Christmas tree successfully in the ground, you will need to plant the seedling in a pot in a greenhouse. You can also buy a young seedling at a tree nursery. You will then transplant the tree to the planting site so it grow tall and strong in the ground. You usually want a 2-2 ratio for a tree, which means it spent two years in a seedbed and two years in a transplant.^{[7]
X
Research source}
- You will need to plant the seedling in a potting mixture in a pot. The potting mixture should be made of equal parts peat, vermiculite, and perlite. Add 1/4 tsp lime per gallon of potting mixture but make sure the pH of the soil is around 7(or neutral). Once the seedling is in the mixture, add fertilizer to the mixture to help the seedling grow.
- You will also need a fluorescent lamp to heat the seeds. Use a white bulb made for plants so you do not burn the plants with the light.
6
Care for the seedling until it is ready for the planting site. Christmas tree species do not need a lot of water after their first year of growth. Make sure you water the seedling from late spring to early fall once a week during its first year of growth.^{[8]
X
Research source}
- 2-2 transplants are best for spruce and fir seedlings. This means the seedling spends two years in a seedbed and two years in the transplant site. 2-0, where the seedling grows for two years in a seedbed, is best for pine seedlings.

Part 2

Part 2 of 3:

Preparing the Planting Site

1
Get the soil tested. The first step in preparing the planting site is to get the soil tested. You need soil that drains well and that does not contain heavy clay. The soil test will dictate if the site is good for a specific seedling.^{[9]
X
Research source}
- The soil test will also give you a pH for the soil. Some species do well in certain soil pHs, such as Fraser firs, which grow best in well-drained soil with a pH of 6.5 to 6.8.
2
Make sure the planting site has a slope. Christmas tree species do not do well with wet feet or excess moisture in the soil. Having a planting site with a 5% to 20% slope will ensure there is good water drainage and good air for growth.^{[10]
X
Research source}
- You should also ensure the site gets full sun. Some seedling types, such as pines, grow well on south and west slopes. Spruces and firs do well on north and east slopes.
3
Mow the area before planting. Prepare the soil for the seedling by removing any existing vegetation with a mower.^{[11]
X
Research source}
- You may also need to take out any stumps or rocks in the soil with a pickaxe or a shovel. The planting site should be smooth, with no excess vegetation, stumps, or rocks.
4
Plant the transplant seedling on the planting site. Once the planting site is ready, you can plant the transplant seedling on the planting site. Hand plant the seedling using a shovel or an auger.^{[12]
X
Research source}^{[13]
X
Research source}
- Dig a hole that is the same depth as the hole the seedling was grown in at the nursery or in the greenhouse. To determine the correct depth, check the trunk of the tree for a noticeable color shift, as this will make the surface level where the seedling was originally grown.
- Place the seedling in the hole and spread the roots carefully and gently. Avoid twisting or screwing the seedling into the hole as this will tangle up the roots, which can kill the tree. Cover up the hole with soil. Give the tree a good watering after the planting.
- If you are planting more than one transplant seedling at a time, make sure the trees are planted in rows eight feet apart, with seven to eight feet between each seedling. This will ensure the trees are not at risk of disease or pest issues.

Part 3

Part 3 of 3:

Cultivating and Harvesting the Tree

1
Water the tree during the dry months or during a drought. Christmas trees require relatively low maintenance after the first year of growth. After the first year of growth, the tree will become established and only require watering during dry months or drought.
2
Maintain the planting site so there are no weeds or grasses. You will need to use a mower to remove any weeds around the tree. You will also need to do careful weed-eating techniques around the trees. Weeds and grasses around the tree can starve the tree of water and nutrients.^{[14]
X
Research source}
- You may want to invest in a weed-killing solution to spread on the soil around the tree. You can use organic weed killers or chemical pesticides.
3
Prune and shear the tree when the needles are ¾-1 inch (1.9cm-2.5cm) long. Pruning and shearing the tree is very important. Do this every year, around mid-summer, after the tree has flushed out its new growth.^{[15]
X
Research source}
- Use pruners or garden shears to shape the tree. Remove any imperfections, such as double tops and any misshapen branches.
- You should limit any pruning during the year you are planning to harvest the tree, as you want to avoid any visible cuts to the exterior branches of the tree.
4
Check if the tree sheds its needles excessively. It is normal for Christmas tree species to shed their needles, usually about 30 percent of their needles every year. But if you notice excessive needle shedding or yellowing needles, these may be signs of a disease or a pest issue.^{[16]
X
Research source}
- You will then need to take steps to eliminate pests that are eating the tree or treat diseases on the tree before you harvest the tree, as you do not want these pests to kill the tree or to enter your home once the tree is harvested. Though it is rare for pests to appear on Christmas trees species, it can happen. The most common pests found on Christmas tree species are the Cinara aphid, the spruce spider mite, and the praying mantis.^{[17]
  X
  Research source}
5
Harvest the tree within six to nine years. Trees like firs and spruces grow about 1 ft (0.30 m) a year, so it takes about 6-10 years to grow a tree that's around 6–8 ft (1.8–2.4 m) tall.^{[18]
X
Expert Source

Matt Bowman
Gardener & Owner, Tradition Market & Garden
Expert Interview. 21 April 2020.} You can harvest the tree by cutting it down with a chainsaw or a handsaw.^{[19]
X
Research source}
- For more information on how to cut down or fell a tree, see: How to Fell a Tree
- If you're interested in replanting the tree after the holiday season, keep its root ball intact by digging up the tree, rather than cutting it.^{[20]
  X
  Expert Source
  
  Matt Bowman
  Gardener & Owner, Tradition Market & Garden
  Expert Interview. 21 April 2020.}
6
Cut the tree down during the late fall. You should cut the tree when it is full of moisture, usually during the late fall, so the needles stay green and supple when the tree is displayed indoors.^{[21]
X
Research source}

EXPERT TIP

Maggie Moran
Home & Garden Specialist
Maggie Moran is a Professional Gardener in Pennsylvania.

Maggie Moran
Home & Garden Specialist

Keep in mind that you can’t replant your tree after harvest. Horticulturalist Maggie Moran says, “Christmas trees are typically cut down rather than dug up. Unfortunately, replanting a tree without roots isn't possible.”
7
Place the tree in a container with water as soon as it is cut. Make sure you place the tree in water once it is cut to prevent the cut from resealing. If the cut reseals, the tree will not be able to take in water and may not have a very long lifespan.^{[22]
X
Research source}
- You can also harvest the tree early, before Christmas, and then cut a thin slice off the trunk and stick it in water when you are ready to display it for Christmas.
- Make sure you regularly water the tree during the Christmas season, as well.

Expert Q&A

Question

Should I choose spruce, fir, or pine for a Christmas tree?

Matt Bowman
Gardener & Owner, Tradition Market & Garden
Matt Bowman is a Gardener, Landscaper, the Owner of Georgia Farm to Table, and the Owner of Tradition Property Services in Atlanta, Georgia. With over 20 years experience, he specializes in organic gardening, landscape maintenance, handyman services, homecare services, and supplying Christmas trees. Matt earned a BA in Journalism from the University of Georgia.

Matt Bowman

Gardener & Owner, Tradition Market & Garden

Expert Answer
Question

How long does it take to grow a Christmas tree?

Maggie Moran
Home & Garden Specialist
Maggie Moran is a Professional Gardener in Pennsylvania.

Maggie Moran

Home & Garden Specialist

Expert Answer

It takes nearly 10 years to grow a tree from a seed to a size suitable for cutting.
Question

Can you plant a Christmas tree after using it?

Maggie Moran
Home & Garden Specialist
Maggie Moran is a Professional Gardener in Pennsylvania.

Maggie Moran

Home & Garden Specialist

Expert Answer

Unfortunately, no. Replanting a tree without roots isn't possible and Christmas trees are typically cut down rather than dug up.