This article was co-authored by Michael Fox. Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.
There are 10 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 154,280 times.
Arched windows can add light, beauty, and style to any room. But with their varying shapes and sizes, covering them can seem difficult and confusing. Whether you have a perfect arch, a palladian arch, an eyebrow arch, or a quarter arch, you have a variety of covering options to choose from. With accurate measurements, a little planning, and some creativity, you'll be able to cover your arched windows without losing any of their charm.
Steps
Using a Fitted Shade or Shutter
-
1Use a measuring tape to measure the width of the bottom of the arch. Measure only the window opening, and measure from left to right of the very bottom of the arch to find the width. Measure to the nearest 1⁄8 inch (0.32 cm), do not round up or down as this will result in an ill-fitting shade or shutter.[1]
- If you are measuring for multiple windows, be sure that you measure each one as their measurements may vary.
- Be sure to measure the width where you plan to mount the covering, even if it is below the arch itself.
- For quarter arches, measure the bottom of the arch for the width.
-
2Divide your width in half and measure the height at that location. To get an accurate height, measure from the center of the width to the highest point of the arch. Record your measurement to the nearest 1⁄8 inch (0.32 cm). Accurate measurements will ensure a great fit.
- For quarter arches, measure the tallest portion of the window.
Advertisement -
3Choose cellular or honeycomb shades to be able to let in light. Cellular and honeycomb shades are often used for rectangular windows, but they can also be shaped for arched windows or just the arch itself. The benefit of these shades is that they are moveable, so you can let in light as you please.[2]
- Choose between fan-shaped shades and sunset shades for just the arch.
- These are often custom made, so be sure to measure your arched windows exactly before ordering!
-
4Use fixed shades if you do not need to open up the arch of the window. This type of shade can be used to match shades for the rest of the window if you choose to keep the arch closed but would like to open shades for the rest of the window. A palladian shelf can be used across the window to hold the rectangular shades.[3]
- Fixed shades still need to perfectly fit the arched windows, so be sure to measure the size accurately.
- Add 2 inches (5.1 cm) to your length and width measurements if you plant to mount your shades on the outside of your arch.
-
5Install a palladian shelf to mount blinds and shades beneath the arch. A palladian shelf can be mounted on the inside of the window frame and is a sturdy structure to mount shades or blinds to extend below your arch. Measure the width of the bottom of your arch to get the right size and screw or nail in end brackets to install.[4]
-
6Customize shutters to fit your arched window and match your decor. Use the measurements of your arch to choose from shutters that swing open, shutters with adjustable louvers to let in light, or shutters that stay closed if you don't need to open your arched window.
- Plantation shutters are a longer-term option for arched windows and can be customized to match elements of the room.
- You could also install an awning if you just want to shade the window. These can be stationary, or you can opt for one that will roll out when you need it.[5]
Using Curtains, Drapes, and Valances
-
1Install curtain rods outside of the arched window frame. If you aren't concerned with fitting your curtains to the shape of your arched window, covering it is simple! Use a drill or screwdriver to install a curtain rod above the arch and hang curtains or drapes that will cover the entire window.[6]
- You can also cover the lower part of the window and leave the arch open.
-
2Mount a flexible curtain rod on the inside of the window frame. A flexible curtain rod is adjustable and allows your curtains or drapes to fit inside the arch of your window. This is an easy solution that also does not involve any screws or nails in your walls. [7]
- You may need curtain rings that lock into place to prevent your curtains from sliding to the sides.
- Use tiebacks to keep curtains open when you want to let in light.
-
3Fit valances over your arched window for a decorative effect. Fitted valances are forms of window treatments that cover just the arch of the window. Measure the height and width of your arch to get the appropriately sized treatment. Make sure the valence is centered before you screw or nail in the brackets that will hold it.[8]
Tinting and Decorating
-
1Apply a window tint to decrease light without losing visibility. A window tint allows you to see out of the window, but limits the amount of light coming in. Be sure you accurately measure your arch and choose a tint that is trimmed to the type of arch that you have. Clean your windows thoroughly, remove the adhesive backing, and attach the film to the window by starting at the top of the window and working your way down.[9]
- Be sure to smooth out any bubbles that form beneath the film.
- A tinted window can also make the room cooler because there is less sunlight entering through the window.
-
2Use decorative window film to create privacy. There are so many choices for window film like a stained glass film to create an interesting look, or frosted window film for increased privacy without losing light exposure. Find one that is right for your aesthetic and install just as you would a window tint film.[10]
-
3Accent your arched window with a metal or wooden grille insert. Window grilles are often used to replicate a historic architectural style, and complement the aesthetic of the arched windows. Attach a window grille insert by using a pin system around the grill work to hold it in place.
- Grille inserts should come with the pins needed to attach it to your window.
Expert Q&A
Did you know you can get expert answers for this article?
Unlock expert answers by supporting wikiHow
-
QuestionHow do you cover the outside of an arched window?Michael FoxMichael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.
Window Repair Specialist
References
- ↑ https://www.blinds.com/i/measure/how-to-measure-for-arches
- ↑ https://www.buyhomeblinds.com/products/movable-honeycomb-arches.php
- ↑ https://madeintheshadesa.com/specialty-shape-windows/
- ↑ https://www.normandeauwc.com/blog/how-tos/how-to-install-window-coverings-in-arched-windows/
- ↑ Michael Fox. Window Repair Specialist. Expert Interview. 1 December 2020.
- ↑ https://www.bhg.com/decorating/window-treatments/basics/arched-window-treatment-ideas/
- ↑ https://stricklandsblinds.com/cover-a-challenging-window/
- ↑ https://www.bobvila.com/articles/install-window-treatments/
- ↑ http://www.allaboutshutters.com/arch-top-window.htm