How to Waterproof a Tent: Tips and Tricks to Keep You Dry

Co-authored by Josh Goldbach and Jennifer Mueller, JD

Last Updated: December 8, 2022 References

You're excited about your upcoming camping trip but worried it might rain. Will your tent hold up and keep you dry? If your tent is brand-new, chances are you'll be fine—modern tents come with built-in waterproofing. But if your tent is a few years old, it could be leaky. Read on to learn everything you need to know to waterproof your tent so rain or shine, you know you and your gear will stay dry.

Things You Should Know

Check for potential leaks through the seams, the rain fly, or the fabric itself.
Apply sealant along the inside of the seams and across the tent floor. Spray a layer of DWR to the outside of your tent. Treat the rain fly separately.
Waterproof your tent at least 2 days before you go camping. Reproof your tent once a year to extend the life of your gear.

1

Check your tent for rips, tears, or leaks.

Focus your efforts on spots where there are active leaks. Take your tent outside on a sunny day several days before your camping trip and set it up.^{[1]
X
Research source} Turn a garden hose on your tent and spray it down. Then, go inside and see if you notice any leaks.
- Look at the sides of the tent too—if the water just beads up and rolls off, you're good to go. Otherwise, it's a good idea to reproof it to prevent leaks.
- If you find any rips or tears, patch them up before you start the waterproofing process.
- Checking your gear several days or even a week in advance gives you plenty of time to fix any issues. You don't want to be scrambling if there's a problem!

2

Wash all of your gear before waterproofing it.

Fill a sink or tub with warm water and a few drops of dish soap. Submerge the tent in the soapy water and let it soak for 20-30 minutes, then use a sponge to gently rub the dirt off of the surface. Rinse the tent in cool water and hang it to dry.^{[2]
X
Research source}
- Use unscented soap—fruity or floral fragrances will attract bugs, adding frustration to your next excursion.
- Always waterproof a clean tent—otherwise, the dirt will flake off and take your waterproofing with it.

3

Erect your tent inside out.

Waterproof your tent outdoors on a sunny day because of toxic fumes. After your tent is dry, take it outside and set it up inside out so you can easily get to the seams. A spot in the sun away from buildings is best—the sun will dry the sealant faster.^{[3]
X
Research source}
- If you're particularly sensitive to fumes, you might want to wear a mask and gloves as well.

4

Apply seam sealant to the seams of your tent.

Use the built-in applicator to sponge the sealant into the seams. If there's old sealant flaking off, scrub that off with the scrubby side of a sponge dipped in rubbing alcohol before applying new sealant. Then, run seam sealant along the insides of the seams, pressing firmly.^{[4]
X
Research source}
- Reseal your seams at least once a year to keep them water-tight and prolong the life of your camping equipment.
- For extra strength, wait a couple of hours for the sealant to dry, then apply a second coat right on top of the first.^{[5]
  X
  Research source}
- You can also use seam sealant to patch very small holes in the fabric of the tent.^{[6]
  X
  Research source}

5

Sponge seam sealant onto your tent's floor.

Seal the entire floor to keep groundwater from seeping in. While your tent is still inside-out, work on the floor. As with the seams, use a scrubby sponge and rubbing alcohol to scrub off any old sealant that's flaking off. Then, use the built-in applicator to scrub the sealant directly onto the floor of your tent.^{[7]
X
Research source}
- If the sealant on the floor of your tent has come off completely, it might be time to go ahead and replace it with a new tent.^{[8]
  X
  Research source}

6

Spray the outside of your tent to refresh the DWR.

Turn your tent right-side-out to apply the DWR. When you think about a waterproof tent, you probably picture water beading up and rolling off—that's what the DWR does. Spray DWR (durable water protectant) on the outside of the tent, then use a clean, damp rag to wipe away any excess product.^{[9]
X
Research source}
- Read the instructions on your DWR carefully—some products require you to get the tent completely wet first.

7

Reproof your rainfly separately.

Use both seam sealant and DWR on your rainfly. Your rainfly is your first line of defense, so make sure it's just as waterproof as your tent is. You can treat the fly while you're treating the tent, but keep them separate so they both get equal coverage.^{[10]
X
Research source}

8

Pack up your tent once the sealant is dry.

Let your tent dry out for at least 24 hours. The sealant container will tell you how long it takes to dry, but 24 hours is a good rule of thumb if you want to make sure. Wait a few hours for the fumes to dissipate, then you can move it indoors so you don't have to worry about it getting messed up outside.^{[11]
X
Research source}
- You might also want to do another test to make sure the sealant works. Just set up your tent outside on a sunny day and spray it down with a hose. If the water beads up and rolls off the tent, you're good to go!
- Never store your tent while it's still wet—it could grow mold.^{[12]
  X
  Research source}

Expert Q&A

Question

How do you set up a tent in the rain?

Josh Goldbach
Outdoor Education Expert
Josh Goldbach is an Outdoor Education Expert and the Executive Director of Bold Earth Adventures. Bold Earth leads adventure travel camps for teenagers all over the world. With almost 15 years of experience, Josh specializes in outdoor adventure trips for teens both in the United States and internationally. Josh earned his B.A. in Psychology from Eckerd College in St. Petersburg, Florida. He’s also trained as a wilderness first responder, a Leave No Trace master educator, and a Level 5 Swiftwater rescue technician.

Josh Goldbach

Outdoor Education Expert

Expert Answer

The best thing you can do is to just get your tent (and rain tarp, if you have one) set up as quickly as you can—that's going to keep the inside of your tent body as dry as possible.

Warnings

Check your tent's fabric so you can make sure the product you buy will work. Many products are designed to work only on specific types of fabric.

⧼thumbs_response⧽
Helpful 0 Not Helpful 0
If you feel your tent lost its waterproofing and is beginning to leak, not just at the seams, it might be better to replace the tent. If the problem happened too early, it may be worth a try contacting the manufacturer for a replacement piece.

⧼thumbs_response⧽
Helpful 0 Not Helpful 0