You don't have to be a hippy or a product of the '70s to love a good tie-dye shirt. Tie-dyeing can be fashionable and fun, offering lots of possibilities to both children and adults. Like many crafting projects, it pays to experiment. Here's a short tutorial on how to tie-dye your own shirt.

Method 1
Method 1 of 4:

Preparing the Dye and Soda Ash

  1. 1
    Get a bottle to dispense the dye. A plastic ketchup bottle would work fine, but a squeeze bottle—like you would find in restaurants—works best.
  2. 2
    Prepare your dye/s. Some people like to use several dyes on their shirts, but only one is necessary. Each color dye will consist of:
    • 1 tbsp (15 ml) organic nitrogen (to help conserve the color in the dye)
    • 1 cup (236.5 ml) warm water
    • 1 ounce (28 g) color dye
    Advertisement
  3. 3
    Prepare your soda ash mixture in a tub or sink. For every gallon (3.79 l) of water, mix in 1 cup (236.5 ml) of soda ash, also known as sodium carbonate
  4. 4
    Wet your white cotton T-shirt in the soda ash mixture.
    • Make sure that the entire shirt is wet; any part of the shirt that is dry will not absorb the dye.
    • Wring the shirt out well, so it is damp.
  5. 5
    Choose your design. There are several different designs you can choose from when making tie-dye, among them the spiral design and the sun design.
  6. Advertisement
Method 2
Method 2 of 4:

Spiral Design

  1. 1
    Locate the middle of the shirt and pinch it with your thumb and forefinger.
  2. 2
    Keeping the shirt pinched, slowly twist the pinched part clockwise or counterclockwise. It should begin bunching up; the folds should resemble a kind of vortex.
  3. 3
    Twist until the shirt has bunched up into a tight circle. It should be about the same height across and round like a saucer.
  4. 4
    Wrap one rubber band around the side of the shirt and several rubber bands over the top. The rubber bands should overlap in the center, making the shirt resemble a cut-up wheel of cheese.
  5. Advertisement
Method 3
Method 3 of 4:

Sun Design

  1. 1
    Locate the middle of the shirt and pinch it with your thumb and forefinger.
  2. 2
    Lift the pinched portion of the shirt up into the air and squeeze the rest of the shirt tightly so that it forms a tight cylinder.
  3. 3
    Without twisting the shirt, wrap 4 or 5 rubber bands down the length of the cylinder so that they are evenly spread out. It should look like a torpedo or baguette.
  4. Advertisement
Method 4
Method 4 of 4:

Dyeing Your Shirt

  1. 1
    Apply the dye outdoors or in a safe place. When applying the dye, you want to add enough so you don't see white. At the same time, you don't want so much dye that there are little puddles of it on top of the shirt. There are several ways you can apply dye:
  2. 2
    Place your dyed shirt in a sealable plastic bag or garbage bag for 24 hours. The dye will still be on your shirt.
  3. 3
    After 24 hours, take the shirt from the bag and run water over it. Make sure the dye has washed out and the water dripping from the shirt is fairly clear. Remove the rubber bands to see what it looks like.
  4. 4
    Directly after rinsing, wash the shirt in the washer with soap and warm water. Do not wash with any other shirts, or the shirts may stain when the dye runs out during the washing process.
  5. Advertisement

Community Q&A

  • Question
    Sometimes, when rinsing, I find the dye is remove from the shirt. Is this normal?
    Community Answer
    Community Answer
    Yes. It's normal for the dye to lighten a bit when washed. But, if it turns almost white, make sure you're using a well known brand of laundry detergent, putting on enough dye, and letting it sit for at least 24 hours.
  • Question
    Should I wash my shirts first before using the soda ash?
    Community Answer
    Community Answer
    Yes, that is advisable. Keep it a little damp after washing so that it's easier to fold and dye. When you wash it, you are taking off the factory coating that is on the clothes, which prevents stains and such. So, it is advisable to wash it.
  • Question
    Do you have to use soda ash when you dye?
    Community Answer
    Community Answer
    Not at all! Soda ash is just one of the many ways that you could tie dye your shirt. There is bleach - if you have a colored shirt, then tie it as you like, then pour the bleach, (or splatter it for a different look). You could use Kool-Aid - add different colors of Kool-Aid to a white shirt for multiple colors. To make your shirt tie dyed with food coloring, just put two cups of white vinegar to two cups of warm water and soak your shirt in the mixture for one hour. While your shirt is soaking mix eight drops of food coloring to 120ml of warm water. Take out your shirt then use your mixture to create fun designs! These are just some of the many ways you can tie dye without using soda ash.
Advertisement

Warnings

  • Always wear disposable gloves and old clothes when dyeing. Rule of thumb: you shouldn't mind discarding it if it accidentally stains.
    ⧼thumbs_response⧽
  • Do not let young children mix the dye unsupervised. After the dye is washed off and dried it poses no danger.
    ⧼thumbs_response⧽
  • Some dyes can cause serious health problems if inhaled or ingested. Wear a face mask if you think you could inhale or ingest the dye.
    ⧼thumbs_response⧽
Advertisement

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 36 people, some anonymous, worked to edit and improve it over time. This article has been viewed 280,700 times.
162 votes - 87%
Co-authors: 36
Updated: February 5, 2021
Views: 280,700
Advertisement