How to Take Body Measurements

Easy methods to take and stay on top of your measurements

Co-authored by David Pew

Last Updated: May 20, 2022 References

There are a variety of reasons why you may want to take your body measurements. You could be making, tailoring, or purchasing clothes, or you may be trying to gauge weight loss. Different purposes will require different measurements but all are easy to take with basic tools and maybe a helping hand. Use the following steps when you take your measurements.

Method 1

Method 1 of 4:

Using a Tape Measure

1
Use the correct type of tape measure. When taking body measurements, you need to use the correct type of tape measure. You will want to use a soft cloth or flexible plastic/rubber tape measure, such as is used in sewing. Do not use a metal measuring tape such as is used in construction (it will be inaccurate).^{[1]
X
Research source}
2
Stand correctly. Stand straight, tall, and breathe normally when taking measurements. Some measurements may be taken better when exhaling, some when inhaling (it will depend on the purpose of the measurement). This may be difficult to do yourself, so get a friend to help you.

Advertisement
3
Measure correctly. You want to be sure that when you measure, the tape is straight and in line with the appropriate body part. For example, for most circumference measurements the tape will need to be parallel to the floor while while lengths will need to be either parallel or perpendicular (based on the line orientation of the body part being measured).
4
Wear appropriate clothing. You can’t get a very accurate measurement when wearing baggy or thick clothing, so try to wear clothes which fit closely or wear nothing at all. Similarly, breast measurements for women will be most accurate when wearing a well-fitting, unpadded bra.^{[2]
X
Research source}
- If measuring for clothes tailoring, some measurements will need to be taken with clothing on, such as pants measurements and shoulder measurements.
- If you're a female, wear the type of undergarments you would normally wear. For example, if you normally wear a certain type of bra, wear that. If you normally bind your chest or go braless, you may prefer that.^{[3]
  X
  Expert Source
  
  David Pew
  Professional Tailor
  Expert Interview. 5 January 2021.}
5
Know when to measure circumference vs length. Different measurements will need to be either circumference measurements (the measurement around something) or length measurements (the measurement between two straight points). Which is necessary should be obvious but all will be indicated in the instructions below.
6
Write down your measurements. Make sure that you write down the measurements as you take them, so that you do not forget them and need to take them again.

Method 2

Method 2 of 4:

Monitoring Weight

1
Measure your upper arm. Measure the circumference around the thickest part of your upper arm, usually at the bicep.
2
Measure your chest. Measure the circumference around your chest at its widest point. For most men this will be at the armpits, for most women this will be at the nipple line.^{[4]
X
Research source}
3
Measure your waist. Measure the circumference around your natural waist and your lower waist (two separate measurements). The natural waist is the smallest point of your waist (unlike where clothes’ waistlines are located these days) and is usually an inch or two above your bellybutton.^{[5]
X
Research source} Your lower waist is the widest part of your waist, usually at the bellybutton or just below, where weight is generally gained first.
4
Measure your hips. Measure the circumference around your hips at the widest point. This will usually be roughly just above the crotch line.^{[6]
X
Research source}
5
Measure your upper thigh. Measure the circumference around your upper thigh at its widest point. This is usually ½ to 3/4’s of the way up your thigh, from the knee.
6
Measure your calves. Measure the circumference around your calf at its widest point, usually roughly ¾ of the way up from the ankle.
7
Measure your weight. For weight monitoring, you may include your body weight as a body measurement. This measurement will need to be taken with a scale, either electronic or manual. You can find scales for sale at many stores, or for use at gyms and doctor’s offices.
8
Measure your height. The easiest way to measure your height is to stand straight with no shoes on and place your back against a wall. Using a pencil, place the pencil flat against the top of your head with the writing end against the wall. Carefully mark your height against the wall. Step away and measure from the mark down to the floor using any measuring tape.
9
Calculate your body fat or BMI. You may wish to use the above measurements to calculate your body fat or BMI if you are intending to monitor your weight loss. Be aware that body fat calculations are frequently inaccurate or unreliable, though BMI is a fairly accurate way of measuring your weight (unless you are a fit athlete, in which case better not).

Method 3

Method 3 of 4:

Tailoring or Making Clothing

1
Take the measurements listed above. You will need many of the measurements listed above for tailoring and creating various items of clothing. Read above if your pattern or instructions call for those measurements.
2
Measure your shoulders. Measure the distance between the shoulder seams on an appropriately fitting shirt or jacket, or take the distance from the tip of one shoulder to the other.^{[7]
X
Expert Source

David Pew
Professional Tailor
Expert Interview. 5 January 2021.} This measurement should be taken across the top of the back and be parallel with the floor.
- This isn't always required for drafting garments, but it's good to know this measurement anyway.^{[8]
  X
  Expert Source
  
  David Pew
  Professional Tailor
  Expert Interview. 5 January 2021.}
3
Measure your shoulder seam. Measure the distance between the seam or desired seam of your collar and your shoulder.
- You might also take the half back measurement, which is taken further down the shoulder blades out to the armhole of the garment.^{[9]
  X
  Expert Source
  
  David Pew
  Professional Tailor
  Expert Interview. 5 January 2021.}
4
Measure your sleeve length. Measure the distance between your shoulder seam and your desired sleeve cuff. This measurement should be taken in a straight line along the outside or top of the arm with the arm held up (parallel with the floor).
- This will help account for the fact that the cuff will move up the arm when the arm is extended, ensuring that your sleeve measurement is not too short.
5
Measure your jacket length. Measure the distance between the middle of the upper shoulder seam and the bottom hem or desired hem of the jacket. It may also be necessary to take a measurement from the back center of the collar seam down to the hem, if the collar seam is particularly high.
6
Measure your shoulder to waist length. Measure the distance between your shoulder seam where it meets with your collar and your natural waist, as described in the above section. This should align with the fullest part of your chest.
- A tailor might also prefer to start measuring from the nape of your neck down to your waist. This is called your waist height.^{[10]
  X
  Expert Source
  
  David Pew
  Professional Tailor
  Expert Interview. 5 January 2021.}
7
Measure your shoulder to nipple length. Measure the distance between your shoulder seam where it meets with your collar and your nipple line. This should align with the fullest part of your chest.
8
Measure your upper bust. Measure the circumference around your upper bust by aligning the measure at the middle of your back, just below the bust line (it should at this point be parallel with the floor), and then closing the tape over the top of your breast. This should help measure breast fullness and rise.
9
Measure your your under bust. Measure the circumference around your under bust by aligning the measure at the middle of your back, just below the bust line (it should at this point be parallel with the floor), and closing the tap just under your breast. This should help measure your rib cage width.
10
Take your waist measurement. This is the distance around your waist. It should be taken at the narrowest part of your waist if someone is looking at you from the front.^{[11]
X
Expert Source

David Pew
Professional Tailor
Expert Interview. 5 January 2021.}
11
Measure your pants length. Measure the distance between the waist and the hem or desired hem of the pant. This should be taken in a straight line down the front center of the leg.
12
Measure your inseam. Measure the distance between the crotch seam or desired crotch seam and the cuff or desired cuff of the pants, along the inside seam. This is considered a very personal measurement and tailors should generally respect your personal space and not get too close. If you are uncomfortable, tell them.
13
Measure your cuff. Measure the circumference around your ankle and account for how loose you would prefer the cuff or alternatively measure the cuff of an existing pair of pants by taking the length from side seam to side seam along the hem.
14
Measure your front rise. Measure the distance between the front center of the waist hem and the crotch seam. This is considered a very personal measurement and tailors should generally respect your personal space and not get too handsy. If you are uncomfortable, tell them.
15
Measure your back rise. Measure the distance between the back center of the waist hem and the crotch seam. This is considered a very personal measurement and tailors should generally respect your personal space and not get too handsy. If you are uncomfortable, tell them.

Method 4

Method 4 of 4:

Fitting Bras

1
Understand that there are many methods. Each company will use a slightly different method to calculate bra size. If you can find a measurement guide or sizing chart for your preferred bra manufacturer, use that. You can alternatively receive a free fitting, over your clothes, at most department and lingerie stores. The method described below is a good starting point for figuring out your bra size but you may need to experiment to find the best fit.
- Keep in mind that bras may fit differently depending on their type. You may need a larger cup than normal, for example, with push-up bras. As with any clothing, it is also possible for bra sizes to run small or large as well.
2
Measure your under bust. Measure your under bust using the method described in the clothing measurement section above. Add three inches to this measurement. If it is an even number then this is your band size. If it is an odd number, round down to the next even number to get your band size.
3
Measure your bust size. Measure your bust at the nipple line as described in the monitoring weight section. The tape measure should just gentle touch you, not be pushing your breasts inward, and be parallel with the floor. If the resulting measurement is not a whole number, round up to the nearest full inch.
4
Subtract your band size from your bust size. This should give you a much smaller number (usually between 2-4). This number is used to calculate your cup size. Here is how the numbers correspond:
- 0-1/2 = AA
- 1/2-1 = A
- 2 = B
- 3 = C
- 4 = D
- 5 = DD
- This measurement system tends to be inaccurate for larger cup sizes and the system for your preferred brand should be followed.

How Can I Measure Myself Without a Tape Measure?

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

How do I take my measurements for a suit?

David Pew
Professional Tailor
David Pew is a Professional Tailor and the Owner of Sew Generously based in Seattle, Washington. With over a decade of experience, David specializes in bespoke tailoring and alterations. He uses his experiences, skills, and eye for detail to produce the highest quality of products.

David Pew

Professional Tailor

Expert Answer

Support wikiHow by unlocking this expert answer.

There are a lot of different drafts out there, but they'll all require a chest measurement, a waist measurements, your waist height, the seat measurement, the halfback, the sleeve length, and the length of the coat.
Question

How can I get the full details of shirt measurements?

Community Answer

Look online, and there should be a measurements tab. All you need is to click on that tab, and it should lead you in the right direction.
Question

How do I measure for a trouser?

Community Answer

Measure around your waist and lower waist, then from there to where the hem on the trousers will fall. Measure from your waist to your crotch, and from there between your legs and over your hind quarters back to your waist (for the underside of your pant). Measure around your thighs, calves, and ankles (maybe your buttocks if necessary), and lastly down your outer and inner leg.

Warnings

Do not pull the measuring tape too tight to where it will press into the skin, though this will give a smaller measurement, it will not be accurate if you are truly trying to record correct size information.

⧼thumbs_response⧽
Helpful 11 Not Helpful 5