Leather belts can be stiff and uncomfortable, especially when they're new. Leather can also grow dry and cracked if the material is not treated regularly. Fortunately, you can use a number of skin-safe chemical treatments to soften a belt so that it sits more comfortably.[1]

Method 1
Method 1 of 3:

Rubbing Alcohol and Vaseline

  1. 1
    Swab the belt with rubbing alcohol. Pour a bit of rubbing alcohol onto a cotton ball for an easy applicator. Then, wipe the leather surface thoroughly with the rubbing alcohol. This should clean the leather and open up the pores of the material. Make sure that the alcohol is deeply soaked into the leather. You may need to apply many coats.[2]
    • You can buy isopropyl rubbing alcohol at most drugstores and grocery stores. You may already have some in your cabinet!
    • If you don't have a cotton ball, use a towel, a tissue, or a clean piece of cotton. You can also use your fingers. Be careful, though: rubbing alcohol can dry out your skin with prolonged contact.
  2. 2
    Follow up with Vaseline. Put Vaseline or another petroleum jelly product onto your finger or a Q-tip. Then, spread the Vaseline across the belt so that it covers the entire surface. Let the Vaseline soak into the leather.[3]
    • You don't need to lump a goopy mess of petroleum jelly onto the belt in order to soften it. A thin, slick layer will do.
    Advertisement
  3. 3
    Clean the belt. Wipe the Vaseline away with a rag or tissue. Leave the leather out to dry before you wear the belt. If you want it to dry a bit more quickly, try leaving it out in the sun.
  4. Advertisement
Method 2
Method 2 of 3:

Using Natural Oils

  1. 1
    Prep the leather in the sun. Lay the leather belt outside on a sunny day. Leave it out for about ten minutes to open the pores and prepare the material.
  2. 2
    Choose your oil. Coconut oil (the organic kind that you'd use for cooking) is a great easy-to-find softening agent. Try avocado oil, jojoba oil, olive oil, or almond oil. Use any natural oil that you would put onto yourself as a skin-softener. Leather is the dried and treated skin of a cow – so it essentially made from the same stuff as your own skin.
    • Natural oils have the added benefit of smelling pleasant. Rubbing alcohol and Vaseline will do a great job of softening up your belt, but you might be off-put by the decidedly chemical scent. Pick an oil that you like to smell.
    • Avoid using chemically hydrogenated oils – namely, most commercial corn oils and vegetable oils.
  3. 3
    Rub the oil into the belt. Simply dip your fingers into the oil, then rub it thoroughly over the surface of the belt. Add multiple layers of oil for an improved softening effect. The more oil you use, the softer the leather will get.[4]
    • Don't worry about using too much. Most natural oil should not damage leather.
  4. 4
    Let the oil dry into the leather. Note that the oil—especially coconut oil—may slightly darken the belt. However, it also turns your stiff leather into a smooth, wearable material. If your belt is not soft enough, try repeating the oil treatment.
    • You can use this darkening effect to change up the look of your leather belt. Just make sure that you apply it evenly so there aren't any mismatching lighter splotches!
  5. Advertisement
Method 3
Method 3 of 3:

Using Leather Treatment Products

  1. 1
    Buy a dedicated leather conditioner.[5] You can usually buy these products (usually labeled as "leather therapy," "restorer," or "conditioner") at stores that sell saddles and bridles for horses. You may also use leather treatment products that are designed to soften, clean, and polish leather shoes.
    • Many of these ointments will actually strengthen leather. They were designed for use on saddles and bridles, and you can trust them as a lasting solution.
    • Be aware that leather treatment products are usually more expensive than natural oils, Vaseline, and rubbing alcohol. Pick up one of these ointments if you have money to spend on pampering your belt.[6]
  2. 2
    Apply the conditioner. Most products will have specialized instructions listed on the bottle or tub of leather ointment. Spray, spread, or rub the conditioner into the leather and let it soak.[7] Apply as needed. Let the belt dry before you wear it.
  3. Advertisement

Expert Q&A

  • Question
    Is there anything else I can use to do this?
    Carroll Kelly
    Carroll Kelly
    Shoe Care Specialist
    Carroll Kelly is a Shoe Care Specialist and the Owner of Austin Shoe Hospital in Austin, Texas. With over 37 years of experience, Carroll specializes in sustainable shoes, boots, belts, handbags, and luggage repair. Carroll graduated with a Bachelor’s degree from the University of Texas. Austin Shoe Hospital is a family-run business that started over 105 years ago from a single horse-drawn carriage. Today they are the largest and most recognized shoe repair company in the world.
    Carroll Kelly
    Shoe Care Specialist
    Expert Answer
    You can apply a shoe stretching solution to a leather belt to soften it, but leather conditioner really works better.
  • Question
    When I oil my belt, will the oil then transfer to my pants?
    Community Answer
    Community Answer
    It depends on the material of the pants. Make sure to let the oil fully soak into your belt before putting it on.
  • Question
    Can I use gun cleaning oil to soften a leather belt?
    Community Answer
    Community Answer
    Gun oil is produced from mineral oil, so no, you need a natural oil as mentioned above.
Advertisement

Warnings

  • Alcohol will tend to dry out the exterior and interior collagen fibrils. This can weaken the leather more quickly.
    ⧼thumbs_response⧽
  • Don't do this to the leather couch or chairs. They should already be soft enough. You may also be disappointed by the resulting discoloration.
    ⧼thumbs_response⧽
Advertisement

About This Article

Carroll Kelly
Co-authored by:
Shoe Care Specialist
This article was co-authored by Carroll Kelly. Carroll Kelly is a Shoe Care Specialist and the Owner of Austin Shoe Hospital in Austin, Texas. With over 37 years of experience, Carroll specializes in sustainable shoes, boots, belts, handbags, and luggage repair. Carroll graduated with a Bachelor’s degree from the University of Texas. Austin Shoe Hospital is a family-run business that started over 105 years ago from a single horse-drawn carriage. Today they are the largest and most recognized shoe repair company in the world. This article has been viewed 334,960 times.
12 votes - 95%
Co-authors: 15
Updated: February 9, 2023
Views: 334,960
Categories: Belts
Article SummaryX

To soften a leather belt, start by applying isopropyl alcohol onto the belt until it’s deeply soaked into the leather. Next, spread petroleum jelly onto the belt until it covers the entire surface, and let it absorb into the leather. Then, wipe the jelly away with a clean rag and let the belt dry before wearing it. Alternatively, you can lay the belt out in the sun for 10 minutes to open the pores of the leather, then apply layers of coconut oil on the surface using your fingers. However, be aware that this technique may slightly darken the color of the belt. For more tips, like how to soften a leather belt using a leather conditioner, read on!

Did this summary help you?
Advertisement