wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 17 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 206,033 times.
Learn more...
Score! You've just caught yourself a rabbit, but you'll need to skin it before you can get any use from the meat or hide. Thankfully, this indispensable skill is easy to learn—and we're here to show you how. We'll walk you through the simplest and easiest ways to skin a rabbit with or without a knife.
Steps
With a Knife
-
1Cut the a ring around each leg of the rabbit, just above the leg joint. Only cut enough to get past the hide. Do not cut deeply into the skin of the rabbit; it is unnecessary and inefficient.
-
2On each leg, make a single slice going up from the ring cut to the backside of the animal. This will make the skinning easier in the end.Advertisement
-
3Start pulling away some of the hide, working from the ring cut at the foot joint down to the backside or genitalia of the rabbit. The hide should come off relatively easily.
-
4Cut your way through the bone of the tail, making sure not to sever or puncture the bladder. The tailbone juts out and is relatively easy to locate.
-
5With both hands, start pulling the hide from the body. The hide will slip off very easily at this point. It should be like peeling a banana.
-
6Work your fingers into the sleeve of the hide where the arms are, removing the arms from the hide. This may be a little tricky at first, so don't be disappointed if it takes a little extra elbow grease.[1]
-
7Work the hide down from the upper torso to the head. Pull the hide down until it rests at the base of the skull.
-
8Sever the head from the spine. With it, the skin should entirely detach from the remaining meat.
-
9With your hands, break the bones at the arm and leg joints. Then, at the joints, sever the skin from the bone using your knife.[2]
-
10
Without a Knife
-
1At the rabbit's knee, push the joint out until the hide separates from the meat. This takes a little bit of practice. Basically, what you're doing is pushing the knee joint in one direction and pulling the skin in the other. This will eventually separate the two cleanly.[4]
-
2Work your fingers around the leg, until the hide is separated around the entire knee joint and surrounding meat.
-
3Pull the knee joint up while pulling the skin down, removing most skin from one leg. This process is kind of like pulling your pants off, except your "pants" is the hide of the rabbit.[5]
-
4Repeat this same process with the other leg.
-
5Beneath the genitals, work your hand under the skin and across the belly. Loosen the skin from the underside entirely by pulling it off.
-
6On the rabbit's backside, right above the tail, work your hand under the skin and across the back. Take the skin and pull it off the backside until it removes entirely from the tail.[6]
-
7Pull the skin down with both hands until it reaches the arms of the rabbit.
-
8Break through the thin skin that sits between the front arms and the head. Do this with your fingers. Although it's hide, it shouldn't take you an overwhelming amount of effort to do this. Once you've done this, pull the sleeves up and away from the meat of the arms.
-
9Crack the spine where it meets the head. When you clean and dress the rabbit carcass, you can cut off the remaining head and hide with a swift stroke of a knife.
-
10
Community Q&A
-
QuestionWhat am I looking for when checking the liver?Community AnswerAny lumps on the liver will indicate a sick liver.
-
QuestionIs it legal to cook it?Community AnswerAbsolutely! Lots of people cook and eat rabbits.
Warnings
- Take a hunter's safety class before hunting any animal.⧼thumbs_response⧽
- Be careful, as the knife should be sharp.⧼thumbs_response⧽
Things You'll Need
- Sharp butcher knife
- Gloves
References
- ↑ https://www.artofmanliness.com/articles/how-to-field-dress-and-butcher-a-rabbit/
- ↑ https://www.artofmanliness.com/articles/how-to-field-dress-and-butcher-a-rabbit/
- ↑ https://www.outdoorlife.com/articles/hunting/2007/09/rabbit-skinning-made-easy/
- ↑ https://www.outdoorlife.com/articles/hunting/2007/09/rabbit-skinning-made-easy/
- ↑ http://www.chai-online.org/en/compassion/reality/reality_rabbit_skin.htm
- ↑ http://www.chai-online.org/en/compassion/reality/reality_rabbit_skin.htm
About This Article
To skin a rabbit, cut a ring around each of the rabbit’s legs above the leg joint just deep enough to get through the hide. On each leg, slice from the ring you just cut to the rabbit’s backside and pull away the hide down to the rabbit's genitals. With the skin partly removed, cut through the tailbone without going too far or you might puncture the bladder. Once the tail is gone, grab the hide with both hands and pull it from the body, working your fingers into the sleeve of the hide around the arms. Keep working the hide down until you get to the base of the skull, then sever the head from the spine. After removing the head, break the bones at the arm and leg joints, then sever the skin above the joints. For more help, like how to skin a rabbit without a knife, read on!