This article was co-authored by Jerry Ehrenwald. Jerry Ehrenwald, GG, ASA, is a graduate gemologist in New York City. He is the previous President of the International Gemological Institute and the inventor of U.S.-patented Laserscribe℠, a means of laser inscribing onto a diamond a unique indicia, such as a DIN (Diamond Identification Number). He is a senior member of the American Society of Appraisers (ASA) and is a member of the Twenty-Four Karat Club of the City of New York, a social club limited to 200 of the most accomplished individuals in the jewelry business.
There are 9 references cited in this article, which can be found at the bottom of the page.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 100% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 426,775 times.
Sterling silver is an alloy of the precious metal silver that is white in color and is highly reflective of light. Because silver in its purest form is too soft for use in everyday items, most silver used in jewelry, flatware, tea sets and other household utensils is 92.5% pure combined with another metal, usually copper, to make it more durable. However, sterling silver is still a delicate metal that is prone to tarnishing. Therefore, it requires specific care to keep it clean and polished to the reflective, high shine that makes it so well-loved. Whether you have flatware, kitchen items or jewelry, learn how to polish sterling silver so that your bright treasures shine for a lifetime.
Steps
Polishing Silver with Aluminum Foil, Baking Soda, and Vinegar
-
1Boil a pot of water. For this method of polishing silver, you will be pouring boiling water over a bowl full of other tarnish-fighting ingredients. Depending on the amount and sizes of the silver you are polishing, you will need to boil more water; just enough to completely cover your items.[1]
-
2Prep your bowl. Get a heat safe bowl and cut a piece of aluminum foil to fit the inside. Lay the aluminum foil shiny side up along the interior of the bowl. If you need to use multiple sheets in order to fill the whole thing, feel free to do so.[2]Advertisement
-
3Add your ingredients. Measure out 1 tablespoon of baking soda, 1 tablespoon of salt, and ½ cup of white vinegar. Add these one at a time into the bowl, creating a fizzy mixture on top of the aluminum foil. If you are polishing several larger items at once, you may need to double these measurements.
-
4Mix the solution. Use a spoon to mix together all the ingredients in the bowl so that they completely dissolve. Leaving chunks of baking soda or salt in the mix could scratch or dull your silver.
-
5Add your water. When your water has reached a boil, slowly pour it into the mixture. Use your spoon to mix the solution a bit more to make sure that it is thoroughly combined.
-
6Place in your items of silver. Slowly drop in each piece of silver, using tongs if necessary to avoid getting burned. Allow the silver to sit for a few minutes in the solution, flipping so that both sides are exposed halfway through.
-
7Pick out the silver. Use tongs to pick each piece of silver out of the water, and place it onto your polishing cloth. Let it sit for a moment to cool slightly, and then polish the entire area of the silver with the cloth. Focus on previously tarnished areas to make sure that they are completely clean.[3]
Polishing with a Mild Detergent
-
1Fill a bowl with warm water and detergent. You will only need enough water to fully cover the silver, so your bowl may not need to be filled very deeply. Use a mild dish detergent to wash your silver. Pour a small squeeze of the detergent into the water and slosh it around with your hands a bit to mix it well.[4]
- Avoid using any soaps that have ammonia or phosphate.[5]
-
2
-
3Rinse off the detergent.[8] Take each piece of silver out of the soapy bowl of water individually. Run it under warm or cool water to rinse all the soap off.
-
4
-
5Give your silver a polish. Use a silver polishing cloth or small microfiber cloth to rub off any tarnished areas that are still visible. Don’t use any fabric or material with heavy or stiff fibers, as these will scratch and dull your silver.[11]
Polishing Silver with a Store Bought Polish
-
1Choose a silver polish. There are two primary types of silver polish available on the market: a liquid, spray on, or cream silver polish. The former is better for regular polishings and minor tarnish while the latter is best for heavy tarnish and larger silver products.[12]
-
2Apply the polish. If you are using a liquid polish, shake the bottle well before applying. Get some of the liquid or cream on a clean polishing cloth, and wipe it onto the surface of the silver. Allow it to set for 1-2 minutes depending on the amount of tarnish.
-
3Polish the silver. Use another section of your polishing cloth to wipe the polish around on your silver, focusing on tarnished areas. This is your primary polish session, so get off any unwanted marks or spots at this point.
-
4Rinse off the polish. Run your silver under lukewarm or cool water to wash off the polish. Use a clean sponge or cloth to remove all traces of the chemicals and completely clean the silver.
-
5Completely dry the silver. Use a new silver polishing or microfiber cloth to dry the silver. Do this immediately after rinsing to avoid the formation of new water spots on the metal. Give a final polish to your silver, and you’re done!
Using Other Household Items to Polish Silver
-
1Try Alka-seltzer. This classic stomach-settler is useful for more than just clearing up indigestion; polish off dirty or tarnished silver by dropping it into a cup of the fizzy liquid. Allow the silver to soak for a few minutes before removing and polishing with a microfiber cloth. Voila! Your silver is sparkly and good as new.[13]
-
2Use an ammonia solution. Fill a bowl with ½ cup of ammonia and 1 cup of warm water, and then drop your silver in. Leaving the silver to soak for ten minutes will dissolve the grime and exposure that tarnishes your silver. Remove from the solution, rinse with clean warm water, and dry off and polish with a polishing rag.
-
3Dip your silver in ketchup. Not nearly as appetizing as fries with ketchup, silver dunked in this tomato-based paste will be returned to its former glory after a brief soak. Fill a small bowl with ketchup and place your silver in the sauce. Use a toothbrush to scrub a wider surface with the condiment or to reach hard to reach detailed areas. Leave the ketchup on for only a few minutes, and then rinse off with fresh water and polish with your microfiber cloth.[14]
-
4Scrub your silver with toothpaste. Silver grills aren’t the only things that can be cleaned up with toothpaste. Use a clean, soft toothbrush and a bit of toothpaste and softly scrub your silver. Rinse off the toothpaste after your scrub and dry it off with your polishing rag.
-
5Use window cleaner. The chemicals in window cleaner work great for polishing metal in addition to glass. Spray a bit of your favorite window cleaner onto a microfiber cloth and wipe down your silver with it.
Expert Q&A
Did you know you can get premium answers for this article?
Unlock premium answers by supporting wikiHow
-
QuestionHow can I make sterling silver shine again?Jerry EhrenwaldJerry Ehrenwald, GG, ASA, is a graduate gemologist in New York City. He is the previous President of the International Gemological Institute and the inventor of U.S.-patented Laserscribe℠, a means of laser inscribing onto a diamond a unique indicia, such as a DIN (Diamond Identification Number). He is a senior member of the American Society of Appraisers (ASA) and is a member of the Twenty-Four Karat Club of the City of New York, a social club limited to 200 of the most accomplished individuals in the jewelry business.
Former President, International Gemological Institute & Graduate GemologistFormer President, International Gemological Institute & Graduate GemologistExpert Answer -
QuestionHow do I remove tarnish from my sterling silver?Jerry EhrenwaldJerry Ehrenwald, GG, ASA, is a graduate gemologist in New York City. He is the previous President of the International Gemological Institute and the inventor of U.S.-patented Laserscribe℠, a means of laser inscribing onto a diamond a unique indicia, such as a DIN (Diamond Identification Number). He is a senior member of the American Society of Appraisers (ASA) and is a member of the Twenty-Four Karat Club of the City of New York, a social club limited to 200 of the most accomplished individuals in the jewelry business.
Former President, International Gemological Institute & Graduate GemologistFormer President, International Gemological Institute & Graduate GemologistExpert Answer
Warnings
- Don't clean sterling silver items unnecessarily, because too much cleaning and scrubbing can damage the surface. Smaller pieces of silver, jewelry, and items that aren't very dirty will shine best if you simply use a soft cloth or a sterling silver polishing cloth on them.⧼thumbs_response⧽
- Do not use cleaners to polish sterling silver unless specifically labeled for such use. Some chemicals, solvents and cleaners can cause permanent damage to this delicate metal.⧼thumbs_response⧽
- Never buff sterling silver with an abrasive cloth, as it can scratch the finish, causing permanent damage.⧼thumbs_response⧽
References
- ↑ https://newengland.com/today/living/cleaning/homemade-silver-cleaner/
- ↑ https://www.foxnews.com/real-estate/ways-to-revive-tarnished-sterling-silver
- ↑ http://cleanmyspace.com/the-besk-kept-silver-cleaning-secret-ever/
- ↑ https://www.today.com/home/how-clean-silver-here-s-what-you-need-know-t99946
- ↑ Jerry Ehrenwald. Former President, International Gemological Institute & Graduate Gemologist. Expert Interview. 12 August 2019.
- ↑ Jerry Ehrenwald. Former President, International Gemological Institute & Graduate Gemologist. Expert Interview. 12 August 2019.
- ↑ https://www.today.com/home/how-clean-silver-here-s-what-you-need-know-t99946
- ↑ Jerry Ehrenwald. Former President, International Gemological Institute & Graduate Gemologist. Expert Interview. 12 August 2019.
- ↑ Jerry Ehrenwald. Former President, International Gemological Institute & Graduate Gemologist. Expert Interview. 12 August 2019.
- ↑ http://www.womansday.com/style-beauty/how-to-clean-your-jewelry-at-home-103103
- ↑ https://www.today.com/home/how-clean-silver-here-s-what-you-need-know-t99946
- ↑ http://www.goodhousekeeping.com/product-reviews/home-products/silver-polish-reviews/best-silver-polishes
- ↑ https://homesteady.com/12402814/how-to-clean-silver-with-alka-seltzer
- ↑ https://www.huffpost.com/entry/how-to-clean-jewelry-at-home_n_5a1ecc98e4b0d724fed55e06
About This Article
To polish sterling silver, first submerge the item in a bowl of warm, soapy water for 30 seconds. Then, scrub it with a toothbrush. Rinse the silver off with cool water, and dry it with a clean microfiber cloth. Finally, buff the item with a polishing cloth to make it shine like new. To remove tarnish from silver, first bring 1 cup (240 mL) of water to a boil. Line a bowl with aluminum foil and add 1 tablespoon (15 g) of baking soda and 1 tablespoon (20 g) of salt. Slowly add ½ cup (120 mL) of distilled vinegar and let everything fizz up. Pour the boiling water into the vinegar mixture and place your sterling silver in the bowl for 30 seconds. Remove the silver and rinse it off under cool water. Finally, buff it dry with a clean polishing cloth. If you want to learn how to polish the silver using aluminum foil and baking soda, keep reading the article!