How to Make a Psi Ball

Last Updated: March 2, 2023

A psi ball is a ball of energy (psi) that can be created and controlled. They can be programmed to carry out much, much more complicated tasks.

This exercise is a lot easier if you have a one on one tutor, but can be found in many books and other resources on magic and Psion training.

Method 1

Method 1 of 3:

Preparation

1
Relax. Sit in a quiet room where no one will interrupt you. Meditate for 5 - 10 minutes until you feel that you are completely calm and in a peaceful state.
2
Ground and center. You could start by visualizing your energy extending down into the Earth like the roots of a tree, connecting with its energy. There are other methods. This exercise is intended to balance you.

Advertisement
3
Recognize the flow of psi. Psi is energy and can be sensed as magnetic force, that energy exists within you and flows through your body all the time.

Method 2

Method 2 of 3:

Sourced from Psipog.net

1
Learn to move psi. This is simple once you know how, but it can take a while to get the hang of it. The psi ball is created by moving psi energy into a desired location in the form of a small sphere. For some, the standard psi ball is a little bigger than a baseball, and smaller than a softball. However, they can be made quite large - to fit around the body in the case of a shield, or even bigger than that.
2
Position your hands. You can use one hand or two, you can hold them vertically or horizontally. Just do what feels right. Make sure you don't get your hands in a position so that it makes you tired and makes you get all shaky because of strain. Some people find it a bit harder to feel the psi if the fingers are touching.
3
Feel the psi flowing. Visualize psi in your solar plexus. The solar plexus is the point where your lower ribs meet in the middle; place your hand on your stomach and your pinky touching the top of your belly button. This is the area you are going to want to use. There are many impressions of what psi looks like, such as water, fire, light... Choose the one that seems right to you. Imagine it in your sternum moving around slowly, and attempt to feel your solar plexus while visualizing this. There is a major chakra located here.
4
Move the psi. Visualize it slowly moving up, going up your chest and over to your shoulders. Try to feel it while doing so. Have it go down to your arms, and to your hands, have it pool there for a little.
5
Make a shell. Pull psi from your solar plexus. When you get to your hands, instead of letting it pool, have it flow out of your palms and shape into a hollow sphere. This sphere is what you are going to use as a shell.
6
Program the ball and fill it in. This means projecting your intentions into the psi ball, to control its behaviour. Basic programming should be to maintain the psi on the inside, and to keep it in one location instead of having if fly every which direction. After you have successfully created a shell, you will want to fill it in; allow the psi to flow into the shell. Your psi ball is ready.
7
Move your psi ball. Move it just like you moved the psi from your solar plexus. This time it won't be in your body, though. This can take practice; you will get better.
8
Experiment with other methods. There are many ways to make psi balls, some people have much better success with doing it a certain way. The principles of it are the same; locate your "energy" source, move the psi, then put the psi into an area and use what "energy" you have to create the psi ball.
9
Experiment with compression. Create the psi ball the size of a beach ball, then when you feel you're ready compress it down into a smaller, denser ball. A lot of people seem to have good results with this.

Method 3

Method 3 of 3:

Two

1
Gather your energy. This could be from your own body or from another source. You could visualize the energy entering and filling every part of your body from the Earth through your feet, or from the sky and the sun through your crown chakra. Some people imagine energy coming into the body on the in-breath and out through the hands on the out-breath.
2
Hold your hands steady. When you feel like you have enough energy hold out your hands. You can either hold them like you hold a basketball, you can cup them like you are holding a baseball, or you can even hold out one hand. Do whatever feels natural to you.
3
Picture a hole appearing in your hand. Picture a trapdoor cover opening and letting the energy flow out. Imagine a hose in each of your palms slowly emitting psi. It doesn't have to be very fast, or have very much pressure, it just has to naturally flow. Don't let it out of your hands; the next step will help with this.
- At this point you should be able to sense the psi. It could feel like heat, pressure or tingling. When you feel this, move your hands closer together a bit - if there is resistance (even a little) you will know you're sensing it.
4
Focus the flow. Using visualization, compact the psi into a ball in your hand. You can also make it into a cube, or a triangle, or pretty much anything!
5
Program the psi ball. This comes easier to some people than others. Have a very clear intention in your mind. Sometimes it may help to say it in words in your head. The point is make sure your message is very clear.
- Psi balls can be programmed for pretty much anything. A common use is to get someone's attention - program the ball to "poke" someone, to let someone know you want to speak to them. The ball can travel long distances to give the message.
6
Release the psi ball. If you programmed it, then it should carry out its programming as soon as you let go. If you made one just for practice, then it should naturally dissipate.

Community Q&A

Question

Do I need to be standing when I form a psi ball?

Community Answer

You do not need to stand. You could sit cross legged or sit on a chair. You could hang upside down from the monkey bars if that suited you. Get into the position that works best for you.
Question

Should I have my eyes opened or closed while doing this?

Community Answer

Either way works. However, with eyes closed, it will be easier to concentrate and feel the psi ball in your hand.
Question

Could I actually make a glowing ball just appear?

Community Answer

Yes. It takes a lot of focus and belief, however. You may get it, but it may not be very visible. Often, the first attempts will be little glimpses of blue. It takes a lot of practice.

Warnings

Psi can be used for unintentional harm. If you choose to create a psi ball, use caution to focus its purpose and be sure not to create any side intentions, or it may cause harm to you or others.

⧼thumbs_response⧽
Helpful 53 Not Helpful 5
If you feel tired, exhausted, or dizzy, stop immediately.

⧼thumbs_response⧽
Helpful 21 Not Helpful 1
If you take energy from a human source, you may drain that person's energy.

⧼thumbs_response⧽
Helpful 49 Not Helpful 7
Try not to make a psi ball while you are in an extreme emotional state of mind, such as being angry or sad. The intention you give to the ball when programming can be affected by your emotions. This is why the grounding and centering step is so important.

⧼thumbs_response⧽
Helpful 40 Not Helpful 7
Making a psi ball can make you feel drained and very tired.

⧼thumbs_response⧽
Helpful 36 Not Helpful 7