How to Make Plastic

Last Updated: September 13, 2021 References Tested

Making industrial plastic requires a degree in chemistry and access to heavy machinery. Easy do-it-at-home projects are available, however, that allow you to make something very similar to plastic with things widely available in your home. You can make casein from milk, polymers from glue, or even moldable styrofoam! See Step 1 for more information.

Method 1

Method 1 of 3:

Making Styrofoam/Acetone Plastic

1
Get the right ingredients. For this method, you're basically melting styrofoam in paint-thinner, creating a semi-hard plastic-type substance that you can use to mold in different shapes and forms. To do it, you'll need:^{[1]
X
Research source}
- Acetone or paint thinner, commonly available at hardware stores
- A mason jar, or other glass container
- Styrofoam cups, or some other kind of expanded polystyrene
- Gloves
- Eye protection
2
Pour some acetone into the glass jar. To complete the job, you'll need a half-inch or at least a few centimeters of acetone at the bottom of the jar.
- Put on your gloves and glasses at all times when handling acetone, which is quite dangerous. Avoid breathing in the fumes and make sure you do this in a well-ventilated area with adult supervision, if you're under 15.
Advertisement
3
Break up the styrofoam into small pieces. Whether you've got some old packing styrofoam or styrofoam cups lying around, start tearing them into pieces small enough to fit into the glass and push all the way to the bottom.^{[2]
X
Research source}
4
Push the styrofoam to the bottom of the cup. You should start to see the reaction relatively quickly, so it's important to keep your safety glasses and gloves on while you do this. Put the cap on the top of the jar, or cover it with a heavy object like a book and let the jar sit for several minutes while the acetone breaks down the styrofoam.
- The more you wait, the more solid the melted product will become. In general, it's at a good moldable consistency between 3 and 5 minutes.
5
Remove the plastic. When you remove the styrofoam from the jar, you'll have a weirdly moldable plastic substance you can shape and mold, much like clay. Keep your gloves on and mold it into a shape you'd like, then let it dry.^{[3]
X
Research source}
- In about 12-24 hours it should be fully formed and solid.
6
Sculpt it into a fun shape. Use your imagination and mold your new plastic into a fresh shape, making a small plastic sculpture you'll be able to paint later, or some other cool design. This is a fun science project for kids and students, providing them with a cool souvenir for later.

Method 2

Method 2 of 3:

Making Polymer

1
Assemble the right ingredients. Polymers are somewhere between a liquid and a solid, molding to the shape of their container, but stretchy and moldable like a solid.^{[4]
X
Research source} To make a basic polymer from simple ingredients, you'll need:
- White craft glue, like Elmer's
- 2 cups
- Water
- Borax powder (laundry detergent)
- Plastic spoon
2
Dissolve borax in one of the cups. Add a small spoonful of borax to the cup and enough water to dissolve it. Stir it up until it dissolves completed, then set aside.
3
Prepare the glue. In the other cup, add a small amount of glue. A few spoonfuls, three or so, of water to the glue and stir it up, thinning it out some.
- If you want to color your polymer, you can also add a few drops of food coloring and mix it up to create a fun color.
4
Add a spoonful of the borax solution to the glue. As you stir, you should notice a slimy texture start to form in the glue, and it may start to stick to the spoon some. Let it sit for 30 seconds, then remove it from the spoon.
- The slimy polymer plastic is fine to touch with your bare hands. Play with it, stretch it, mold it, make crazy shapes. It's difficult to get it to hold it's shape, but it makes a great creepy plastic alien goo for kids to play with.
5
Keep it away from the air. To store the plastic slime, keep in a sealed plastic bag. It'll last a while if you take care of it, or you can make some more the same way!

Method 3

Method 3 of 3:

Making Casein Plastic

1
Assemble the right ingredients. To make a simple and natural plastic-like substance from simple household ingredients you've probably already got in your kitchen, assemble the following:^{[5]
X
Research source}
- 1 cup of whole milk or heavy cream, fatter is better
- Vinegar or lemon juice
- Saucepan
- Strainer
2
Heat the milk. In the saucepan, heat the milk gently and bring it just to a simmer. Be very careful not to boil the milk, which will ruin the reaction.^{[6]
X
Research source}
3
Add the vinegar. Adding a few tablespoons at a time, stir in the vinegar with a spoon until the milk starts to separate into solids and liquids. This is basically the cheese-making process of separating and creating curds.
4
Strain the mixture. Remove from heat and pour the milk through the strainer when it's cool enough to handle. The rubbery and soft stuff in the strainer is the "milk plastic," called casein, an essential part of cheese-making.
- By heating the milk and adding the vinegar, you started a chemical reaction that brought out the natural polymers of the milk, and made a natural plastic-like compound.
5
Harden the plastic by freezing. See how your plastic stuff reacts when pinched, stretched, or dropped. If you let it sit for a while, or put it in the freezer, it will get hard.
- You could also pour it into candy molds or other shapes and allow it to harden in a fun shape. If you haven't painted it already, paint it to make holiday ornaments or natural jewelry as a fun project for kids.
- The plastic will be good for a few days, but has the basic shelf-life of food. Throw it away before it molds.

Community Q&A

Question

Can I mold bricks out of Styrofoam/acetone plastic?

andy wang

Community Answer

Yes, you can.
Question

Can you give me a detailed answer on what I need to do after I finish hardening the casein plastic?

Community Answer

Not much do after hardening it. You can paint it after hardening, but you must shape it before you harden the casein.
Question

Is the casein plastic edible since it is milk-based?

Community Answer

It is, but that doesn't mean it will taste good, or that it won't be a choking hazard.

Warnings

Always be careful when using the stove, and wear protective eyewear when handling acetone. If you're a kid, let an adult help you.

⧼thumbs_response⧽
Helpful 0 Not Helpful 0