How to Grow Potted Plants

Co-authored by Lauren Kurtz

Last Updated: December 2, 2022 References

Growing potted plants lets you skip the dirty work of weeding and clearing a soil bed. Instead, you can get right to the fun stuff! Start by providing the light and soil conditions that your specific plants prefer. When you're ready to plant, nestle your plants into the pot, and soak the soil to help them settle into their new home. Water, fertilize, and prune them regularly, and keep an eye out for pests and diseases. With a little effort, you can keep your plants green throughout the growing season or, depending on the species, for years to come.

Part 1

Part 1 of 3:

Creating the Right Environment

1
Choose containers with drainage holes. Pots come in plenty of colours, shapes, and sizes, but the most important consideration is drainage. Make sure any container you purchase has small holes at the bottom so your plants’ roots won’t drown. ^{[1]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source} Unglazed clay (terra cotta) pots provide better soil aeration than plastic pots and decrease the risk of water logging.^{[2]
X
Research source}
- If you can't live without a pot that doesn’t have drainage holes, purchase a slightly smaller plastic container that has drainage holes and fits inside the pot without holes.
- Grab the saucer that matches your pot. A saucer fits under the pot, collects drained water, and prevents messes.^{[3]
  X
  Research source}
2
Select light-loving plants if you plan to put them in full sun. The best location where you’ll keep the pot depends on the type of plants you purchase. Keep plants with tags labelled “full-sun” in outdoor sun-soaked spots and indoor areas by windows.^{[4]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- If you have a spot for the pot in mind, observe the area before purchasing your plants. Make sure it gets at least 6 hours of direct sunlight. If it doesn’t, go for a plant marked for shade or partial sun.
- Full-sun options include most flowering plants, such as petunias, geraniums, salvias, true lilies, canna lilies, and lilacs. Other sun-loving plants include those that bear fruits and vegetables, like tomatoes, peppers, and cucumbers. Most herbs, including basil, lavender, and thyme, also require lots of sun.^{[5]
  X
  Research source}
Advertisement
3
Opt for shade plants to put in spots that don’t get much sunlight. When you’re at the nursery or home improvement store, check for plant tags marked “shade-tolerant” or “moderate sun.” This means the plants need around 3 hours of sunlight or less per day.^{[6]
X
Research source}
- Good flowering options include begonias, impatiens, crocuses, periwinkle, lilies of the valley, and some tulips. Ajuga and coleus are shade tolerant and produce attractive leaves in a range of colors.
- While they grow best with moderate sun, spider and snake plants tolerate low light levels. They're popular houseplants and require little maintenance.^{[7]
  X
  Research source}
4
Use potting soil that has the right drainage requirements for your plants. Topsoil from your yard would dry out and clump, and store-bought garden soil is too dense to allow proper drainage. If you have a bag of garden soil and don’t want to splurge on potting soil, combine equal parts of garden soil, peat moss, and perlite (see also ^{[8]
X
Research source}).
- Store-bought potting soil is the best choice for most plants. However, some have specific requirements. If you’re planting orchids, you’ll need to get a growing medium that’s full of bark and other large chunks of organic matter.^{[9]
  X
  Research source}
- Perlite is a volcanic mineral material that increases soil aeration.^{[10]
  X
  Research source}
- Vermiculite is a clay mineral. It can help retain moisture while allowing aeration, though it's compressible, so perlite is better for aeration. Vermiculite increases the cation exchange capacity (CEC, the ability of the soil to retain positively-charged nutrient ions such as calcium, magnesium, and potassium).^{[11]
  X
  Research source}
- Fruits and vegetables prefer nutrient-rich clay or loam soils that retain moisture.
- Cacti and other succulents prefer well-drained, sandy soil. Go for a store-bought cactus mix or combine equal parts of sand and potting soil.
5
Amend the soil if necessary to ensure it has the right pH. You can test your soil's pH and amend it to suit your plants' preferences. Add sphagnum peat or sulfur to make it more acidic, and powdered limestone or wood ashes to make it less acidic.
- Some plants, such as banksias and grevilleas, are phosphorus-sensitive and need a low-acid, low-phosphorus soil. On the other hand, camellias and azaleas thrive in phosphorus-rich acidic soil. Some mineral nutrients (including iron, manganese, boron, copper, and zinc) are more readily available in acidic soils.^{[12]
  X
  Research source} Fertilizers that are specifically for acid-loving plants are often enhanced with these nutrients.
- When shopping for potting mixes, match the soil's pH and phosphorus levels to the recommendations on your plants' tags.
6
Provide the right amount of space for your plants. Shrubs, like hibiscus, fuchsia, and bougainvillea, and plants that bear fruits and vegetables typically need lots of room to grow. Go for containers that are at least 1 to 2 feet (30 to 61 cm) deep and hold at least 5 to 10 gallons (19 to 38 L) of soil.^{[13]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- Plants like rubber trees, tomatoes, peppers, and carrots usually do best on their own. They have large root systems and consume lots of nutrients.
- Plants with more modest root systems, like pansies, dusty millers, daisies, ajugas, creeping Jenny, and succulents, do well with other plants. To allow room for growth, space them about 4 to 6 inches (10 to 15 cm) apart, or according to the instructions on their tags.^{[14]
  X
  Research source}

Part 2

Part 2 of 3:

Preparing Your Planter

1
In spite of what you’ve heard or read, do not put rocks or gravel in the bottom of the pot. Many people do this because they think it will improve drainage but it has the opposite effect. ^{[15]
X
Research source}
- Fine soil retains water more readily than coarse soil does, so fine soil on top of coarse-grained material results in a perched water table. Water is held more tightly in the small spaces between fine soil particles than in the large spaces between coarse soil particles. ^{[16]
  X
  Research source}
- For this reason, loose “filler material” at the bottom of the pot actually interferes with proper drainage.
- To improve drainage, mix coarse sand or perlite throughout the soil profile in the pot.
- Pots are a pretty unnatural environment for most plants so generally a deeper pot with an even balance between aeration and water retention throughout the soil profile will make your plants happier.
2
Add soil to within 2 inches (5.1 cm) of the container’s rim. Dump the bag of potting soil into a large container, or use a trowel to fill a small pot. Keep the soil loose, and shake the pot to even out mounds instead of packing it. Leaving about 2 inches (5.1 cm) between the top of the soil and the container’s rim will allow you to water the container without it spilling over the edge.^{[17]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- The space between the soil and rim will also give you room to scoop out holes for the plants.
3
Water your plants thoroughly, then knock them out of their plastic cup. Soak your plants to prepare them for transplant. Pick one up, and place your hand on top of the cup so the plant’s stem is between your fingers. Turn the cup upside down and carefully squeeze the sides of the cup to remove the roots and soil ball.^{[18]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- Don’t pull the stem to remove the plant from the cup, and try to disturb the roots as little as possible.
- Knock the plants out of their cups one by one. Remove a plant from its cup, transplant it, then move on to the next.
4
Massage the root ball gently to encourage growth. After removing the cup, lightly massage the roots with your fingertips to loosen them from the soil. Don’t unravel the root ball, rub hard, or work away all of the soil. You just want to loosen the roots a bit to encourage them to spread out in their new home.^{[19]
X
Research source}
5
Dig a hole equal in size to the plant's root ball. Dig a hole in the center of the soil bed large enough to accommodate the root ball. It should be deep enough so the crown (where the roots meet the stem) will be level with the top of the soil. Place the root ball in the hole, then fill in soil to level the surface.^{[20]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- If you’re just growing one plant in an individual pot, you don’t have to worry about planning the arrangement or spacing other plants.
6
Place the tallest plants in the middle, if you’re using a variety of plants. Start by scooping a hole in the center for the tallest plant. Place the root system in the hole so the plant’s crown is level with the top of the soil, then fill in the hole so the surface is even.^{[21]
X
Research source}
- For example, if you have tall grass, spiky Dracaena, or phormium, plant it in the center of the pot. Provided you have a deep enough pot, azaleas, hibiscus, and elephant ears work well as tall focal points.
7
Add smaller plants closer to the container’s edges. When you're finished with the tallest plant, work your way toward the edges as you you plant flowers, vines, or other smaller specimens. Create a middle layer of flowering or brightly-colored plants, and place vines that will spill out over the sides of the pot about 2 inches (5.1 cm) from the edges.^{[22]
X
Research source}
- Great filler plants include coleus, ajugas, and hostas. Petunias, salvias, pansies, and geraniums are popular choices that add pops of color.
- Good spillers, or plants with foliage that trails over the pot's edges, include creeping Jenny, clematis, English ivy, and sedum.
- Space the plants about 4 to 6 inches (10 to 15 cm) apart from each other, or according to the instructions on their tags. Don’t worry if the container looks a bit sparse. Your plants need room to grow, and they’ll fill in empty spaces within a few weeks.
8
Soak the soil when you finish planting. Thoroughly soaking the soil will help prevent transplant shock. Water the container until the pot starts to drain and the top of the soil is saturated. Depending on the container’s size, it could take several minutes to water it completely. Water will drain from the bottom of the container, so be sure to place the pot on a saucer.^{[23]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- Stop watering when you see water leaking from the drainage holes at the bottom.
- Room temperature water is ideal, especially for tropical plants, like elephant ear, bougainvillea, and orchids. If water from your hose or faucet feels ice cold, fill a pitcher or watering can and allow it to warm to room temperature.^{[24]
  X
  Research source}
- Tap water is usually fine, as long as you don't use water softeners. Water treated with softeners can cause salt buildup. Distilled water is best for carnivorous plants, like pitcher plants and Venus fly traps. They prefer low-nutrient soil and don't like the minerals in tap water.

Part 3

Part 3 of 3:

Caring for Your Plants

1
Keep a saucer under the pot to catch drained water. A saucer will prevent dirty water from pooling on your floor, windowsill or desk. Empty the saucer about an hour after watering to prevent root rot.^{[25]
X
Research source}
- If the container is too heavy to lift and you can’t remove the saucer, use a bulb baster to suck up the water.
2
Water the pot when the soil is dry or according to the tag’s instructions. The right amount of water depends on your plants, the size of your container, and whether you keep the pot indoors or outdoors. As a general rule, stick your finger into the soil and water only when it’s dry.^{[26]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- If the soil is moist and your finger can easily penetrate it, don't water the pot. If the soil feels dry and your finger can't easily penetrate it, your plant needs water.
- For most plants, watering thoroughly and letting the soil dry completely is better than keeping the soil damp. Roots can't grow through dry soil, but too much water prevents the roots from getting enough oxygen.
- Most flowering plants, fruits, vegetables, and herbs need to be watered daily. Cacti and other succulents should only be watered every 2 to 4 days at most.
- When in doubt, check your plants’ tags and water them as directed.
3
Add slow-release fertilizer beads monthly, or as the tag recommends. Nutrients leech from the soil every time you water, so you’ll need to fertilize your potted plant regularly. All-purpose fertilizer beads that release nutrients over time are good for most plants, but you should check plant tags for specific instructions.^{[27]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- Use about 1/2 teaspoon of fertilizer beads for 1 gallon (3.8 L) of soil. Spread the granules over the soil, and use your fingers or a small trowel to work it about 2 inches (5.1 cm) deep.
- Different nutrient deficiencies have different symptoms. Old leaves could be more affected than young leaves, or the reverse. Leaves can turn yellow around the edges, or between the veins. See ^{[28]
  X
  Research source} for a pdf file on nutrient deficiency symptoms.
- In general, flowering plants, fruits, and vegetables need more nutrients than herbs and succulents. During mid-season, or when they produce ripe fruit, fertilize plants like tomatoes and peppers every 1 to 2 weeks. Keep an eye out for yellow leaves, which could indicate you're over-fertilizing.
- A white crust on the soil surface can be a sign that you're not watering enough, or you're applying too much fertilizer. Plant fertilizers are salts, and can accumulate on the soil surface as water evaporates. Salts interfere with the plant's ability to take up water. You might need to apply more water, without increasing the frequency of watering. If you see a salt crust, water abundantly (outdoors or in the sink), allowing a lot of water to drain from the bottom of the pot to flush salts from the soil.
- You don't have to be fussy about fertilizing herbs, like basil, cilantro, lavender, and rosemary. They're prone to over-fertilization, so 1 application every 3 to 4 months is best.^{[29]
  X
  Trustworthy Source
  Penn State Extension
  Educational organization dedicated to delivering science-based information to people, businesses, and communities
  Go to source}
- Cacti and other succulents only need to be fertilized once or twice a year.
4
Prune your plants whenever you see dead leaves. Use clean pruning shears to cut dead flowers and leaves. Trim them at a 45 degree angle just below the brown or dead area. Clip new growth at a 45 degree angle about ¹⁄₂ inch (1.3 cm) above the nodule to keep a rapidly growing plant in check.^{[30]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- The nodule looks like a small bump or bud where new growth emerges.
- If you’re clipping herbs or pruning a rapid grower, avoid removing more than 30% of the plant at a time. Clipping too much can shock and kill the plant.
- Pruning encourages new growth and will lead to fuller, more robust plants.
5
Cut off any part of the plant that has rot or fungus. In addition to regular pruning, you’ll need to remove diseased leaves as soon as you spot them. Signs of disease include black or brown spots, yellowing, white patches, and foul odor. If the problem persists, purchase an antifungal spray labelled for plants.
- Look for a fungicide formulated for your specific plant at a gardening center. Read its instructions, and apply it as directed.
- Common plant diseases include black or white fungal and bacterial blights, fungal rusts (which are characterized by a rust-colored coating), and cankers, or areas of dead, oozing tissue on wood stems.
6
Houseplant pests can often be controlled by mechanical (non-chemical) methods.^{[31]
X
Research source} Small arthropods (insects, mites) can often be controlled by removing them with a soft brush, applying non-toxic sprays such as neem oil or soapy water (see below) or, if there aren't too many, gently scraping them off with a fingernail. If your plant is sturdy enough, simply spraying with water can knock some insects off. Sticky materials such as yellow card traps ^{[32]
X
Research source} or goo such as Tanglefoot® catch some insects.
- Common pests include aphids, ants, gnats, spider mites, and whiteflies. While aphids, ants, and flies are visible, mites are tough to spot. Look for patches of fine webbing with tiny, barely visible specks. Signs of mite infestation include tiny light green spots on leaves and stems, yellow discoloration, and curled or dead leaves.
- Tiny insects such as aphids, scales, spider mites, whiteflies, mealybugs, etc. can usually be controlled by spraying with soapy water. The soap isn't toxic. It breaks the surface tension of the water, allowing it to get the insects thoroughly wet and block their spiracles (breathing holes) so they drown. Many sprays sold in garden stores list "potassium salts of fatty acids" as the active ingredient. That's the chemical description for dish soap. Spray with a well-diluted solution of dish soap and save your money.
- If you need to use synthetic chemicals, look for an insecticide at a garden center. If you keep your plant indoors, make sure the product is labelled for houseplants. Most plant insecticides are recommended for specific plants and pests. Read your product’s instructions and use it as directed. Check labels for your plants or ask an employee at the garden center for help. Consider the safety for children and pets, and apply sprays outdoors if possible.

Community Q&A

Question

How can I make natural fertilizer from things at home?

Alex Samin

Community Answer

Take some banana peel, wait for it to rot, then mix it with water, and TADA, it's fertilizer.
Question

Should compost in potted plants be renewed? If so, how often?

Community Answer

It won't need to, unless the plant gets too large for the pot. Then you should put the plant in a bigger pot with the same compost, then add some on top.
Question

What is the best soil to use for growing vegetable (chili or curry leaf) plants indoors?

Alex Samin

Community Answer

A pH of 6 or 7; normal soil would be just fine in most cases.