How to Fix a Broken Zipper

Last Updated: November 20, 2022 References

While zippers are mostly reliable, they do break or get stuck sometimes. When this happens, you may be frustrated and fear that you’ll need to replace the entire item itself. However, there are a variety of ways you can try to fix a zipper so you don’t have to replace the item. With a little work, you may be able to fix a stuck zipper, repair broken zippers, and cope with a variety of other zipper problems.

Method 1

Method 1 of 5:

Fixing a Stuck Zipper

1
Lubricate the zipper with graphite. When your zipper just won’t budge, applying a lubricant can get it moving. Try rubbing graphite on your zipper’s teeth to lubricate them.
- Purchase a graphite stick used specifically for lubrication. If you don’t have one, use a Number 2 pencil.
- Run the pencil up and down the zipper’s teeth. If you want, you can just apply it to the area of the teeth where the zipper is stuck.
- Wiggle the slider up and down until it moves smoothly along the teeth.
2
Apply laundry soap. When graphite doesn’t work, apply a dab of laundry soap to your stuck zipper. The soap may add an extra level of lubrication that will help you get the zipper unstuck. To use laundry soap as lubrication:^{[1]
X
Research source}
- Pour a small amount of detergent into a small dish.
- Pour a small amount of water into the same dish.
- Dip a cotton ball or swab into the mixture.
- Use the saturated cotton ball to coat the teeth in the solution.
- Place the cotton ball down and gently attempt to unzip the zipper. It may only move a little. If this is the case, return the slider to its original position. Repeat until the zipper is unstuck.
Advertisement
3
Wash the item and lubricate it. If graphite or laundry detergent don’t work, you may want to launder the item and try again. Ultimately, washing the item may help remove dirt, grime, and other objects that hinder your ability to close the zipper. After you wash it, apply more lubricant.
- Consider washing the item by itself. This way, loose threads, fuzz, or debris from other items won't get stuck in the zipper.

Method 2

Method 2 of 5:

Addressing a Separated Zipper

1
Remove buildup from a zipper’s teeth. When substances build up around the teeth of your zipper, it can prevent the zipper from staying closed. As a result, you’ll need to clean the teeth and remove stuff that could be preventing the zipper from closing.
- Combine water and soap in a small dish, and stir until suds form.
- Dip a clean rag in the soapy water and wipe down the zipper’s teeth.
- Grab a fresh rag and run it under the tap.
- Wipe the soapy mixture off the teeth with the damp rag.
- Attempt to zip and unzip as normal.^{[2]
  X
  Research source}
2
Straighten bent teeth. If all else fails, you may need to fix bent teeth to get your zipper to close. To do this, use your tool of choice (perhaps pliers) to pull the tooth straight.
- Repeat as needed.
- Be careful not to pull the tooth out of the tape.
- Test the repair by opening and closing the zipper as normal.
3
Resecure the zipper and the teeth. Move the slider towards the bottom of the zipper without pulling it off. Straighten and align the zipper’s teeth with your fingers. Slowly feed the zipper into the slider. You may need to apply a little force. Make sure the side of the zipper moves down all the way into the bottom stopper.
- You may need to repeat this several times.^{[3]
  X
  Research source}

Method 3

Method 3 of 5:

Fixing Problematic Sliders

1
Remove the top zipper stops. You'll probably have to use a lot of force to remove the zipper stops. If you use pliers to gain more leverage, be careful that you don’t clamp down too hard and further damage the zipper. This is important, as you won’t be able to fully access the teeth of the zipper or examine the slider without removing the stops.^{[4]
X
Research source}
2
Slide the slider off the teeth from the top and examine it. Examine the slider from the side. Look to see if the space between the bottom and top of the slider are uneven. An uneven gap may prevent the slider from properly engaging the teeth.
- If the slider is bent or there is a gap, take a pair of pliers and try to straighten it out.
- If you can’t fix the slider, you will have to replace it. The size should be listed on the back. If the size is not listed, measure the slider. Zipper parts are measured in millimeters. A 5-mm slider is a size 5. Purchase a replacement slider at your local fabric store or online.^{[5]
  X
  Research source}
3
Replace the slider. After you’ve fixed or replaced the slider, you need to put it back on the teeth of the zipper. When replacing the slider, make sure to:
- Locate the side of the zipper that has the square tab on the bottom.
- Wedge the top teeth of the zipper into the slider.
- If necessary, use a flathead screwdriver to wedge the teeth into the gap.
- Wiggle and pull the slider until it moves down to the bottom of the zipper.^{[6]
  X
  Research source}
4
Check to see if the slider works. Try zipping the item as normal to see if it has a complete range up and down the teeth track. There are a number issues that could continue to cause problems for you:
- If the zipper continues to split and you replaced the slider, you may have purchased the incorrect size. Try a different size slider.
- If you bent the original slider, the gap may still be uneven. Remove the slider and bend it again. Repeat until the item zips properly.^{[7]
  X
  Research source}
5
Replace the top zipper stops. Once you’ve replaced the slider, you’ll have to replace the top zipper stops above the top set of teeth. Without securing the stops, your slider will fall off or won’t function correctly.
- Use a pair of pliers to clench the stop into place.
- Press down on the stop 4 to 5 times to secure it.
- Repeat on the other side of the zipper.
- If you are only replacing 1 top zipper stop, make sure you place it on the side of the zipper with the tab at the bottom.^{[8]
  X
  Research source}

Method 4

Method 4 of 5:

Repairing Missing Bottom Teeth

1
Take off the bottom stop. The bottom stop is the piece that the slider will rest against when it travels all the way down the teeth to the bottom of the zipper. To deal with missing bottom teeth, you’ll have to remove the old bottom stop.
- Hold the garment firmly and pull the stops off.
- In some cases, you may need pliers to help you gain more leverage pulling the stop off.^{[9]
  X
  Research source}
2
Remove the tack at the base of the zipper. The tack is a piece that keeps the parts of the zipper secure to the garment. By removing the tack, you’ll be able to fully access the teeth. This is important, as you’ll need to fix all your zipper’s teeth before your zipper will work correctly.
- Flip the garment inside out and locate the tack at the bottom of the placket layers of the item (this will be on the inside flap covering the zipper).
- Remove the tack with a seam ripper.^{[10]
  X
  Research source}
3
Attach a larger bottom stop. By inserting a new and larger bottom stop, you’ll be able to cover missing teeth. Thus, your zipper will function normally and won’t get stuck or snagged in the future.
- Bottom zipper stops are measured in millimeters. Determine the size you will need by measuring the width of the closed zipper.
- Turn the garment right side out.
- Push the prongs of the bottom zipper stop into the fabric directly above the old zipper stop—the new zipper stop will cover the missing bottom teeth.
- Turn the garment inside out and check if the stop is perpendicular to the zipper.
- Close the prongs with a pair of pliers to secure it in place.^{[11]
  X
  Research source}
4
Re-tack the placket layers. Once you’ve attached a new stop, you’ll need to re-tack the bottom portion of the zipper so it holds together with the garment. This is somewhat easy to do.
- Turn your garment right side out.
- Use a sewing machine or a needle and thread to replace the tack you removed.^{[12]
  X
  Research source}

Method 5

Method 5 of 5:

Creating Quick Fixes for Sudden Problems

1
Replace a broken pull with a new pull or a paperclip. Open the small metal ring attached to your new pull with the round tip pliers and hook the open metal ring onto the end of the slider. Use round tip pliers to close the metal ring and secure the new pull in place.
- If you’re on the road and don’t have a new pull or pliers, use a paperclip as a temporary pull. Simply slip the paperclip into the old pull or the slider itself.^{[13]
  X
  Research source}
2
Use a key ring to secure a slipping pants zipper. Slipping pants zippers are one of the most frustrating types of zipper problems. To create a temporary fix, attach a keyring onto the end of your zipper pull. Zip up the garment and hook the key ring around the button of your pants.^{[14]
X
Research source}
3
Manually close the zipper. If the zipper doesn't function correctly, you may be able to close it temporary by forcing both sides of the teeth together. To create a temporary fix, start at the bottom and move your way up until the zipper is closed.
- If you have buttons to secure your garment, fasten them to help keep the zipper closed.

Expert Q&A
Did you know you can get premium answers for this article? Unlock premium answers by supporting wikiHow

Question

Can I fix a broken invisible zipper?

Chloée Ohayon-Crosby
Costume Designer & Wardrobe Specialist
Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.

Chloée Ohayon-Crosby

Costume Designer & Wardrobe Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

Those are a little bit harder to fix, and it's most likely going to be better to just replace it to save yourself time and not have to worry about it breaking again in the future. The last thing you want is to be out in public and your zipper breaks.
Question

What if the slider is completely off?

Chloée Ohayon-Crosby
Costume Designer & Wardrobe Specialist
Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.

Chloée Ohayon-Crosby

Costume Designer & Wardrobe Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

At that point, you're going to have to replace the zipper. There's really no way to fix it.
Question

Can a tailor fix a broken zipper?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Support wikiHow by unlocking this staff-researched answer.

Tailors can repair or replace broken zippers. Taking your item to a tailor is a great option if you don’t feel comfortable doing the repairs yourself.