How to Determine a Faucet Brand

Co-authored by David Balkan

Last Updated: October 9, 2022 References

Whether your faucet was there when you moved in or you picked it out and installed it yourself, you may not know or remember its brand. This hardly seems like a big deal until your faucet has issues and you aren’t sure how to go about getting it fixed. Luckily, there are a few ways that you can find out what the brand of your faucet is.

Method 1

Method 1 of 3:

Checking for a Brand Logo

1
Clean the faucet handles and check for a logo. To ensure that dirt and grime aren’t covering up the brand name or logo, spray the faucet and the handles with a multipurpose cleaner or glass cleaner.^{[1]
X
Research source} Wipe the cleaner off with a rag, and then observe the faucet and handles to see if there are any words or shapes that may represent a particular brand.^{[2]
X
Research source}
2
Look at all of the faucet’s parts under a flashlight. Some brand names and logos on faucets are very small or are etched into inconspicuous parts of the faucet. To get a better look at the faucet, hold a flashlight over it and get close to it.^{[3]
X
Research source}
- Look all around the curves of the faucet and the handles to be sure that you aren’t missing a subtle representation of the faucet brand.
Advertisement
3
Look for a model number if there’s no logo. While less likely, there may just be a model number visible on the faucet instead of a brand name or logo. If you find a number but no brand information on the surface of your faucet, try looking up the number online. If you search the entire model number, the company’s webpage may pop up.^{[4]
X
Research source}
4
Look for a user manual if you recently bought the faucet. Many items that you purchase come with an instruction booklet or a small informational packet. Look around your home to see if you can find the manual that may have come with your faucet.

Method 2

Method 2 of 3:

Locating the Broach and Counting its Splines

1
Turn off the water supply before taking the faucet apart. To turn off your water supply, look for a stop valve that will keep the water from flowing through your fixture. Stop valves are usually located below or near the fixtures, and they typically have a chrome finish and an oval shape. Turn the stop valve clockwise until you can't anymore before taking your faucet apart.^{[5]
X
Research source}
- If you’re working with a sink faucet, the stop valves should be located underneath the sink and all the way back.^{[6]
  X
  Research source}
- If you can’t find the stop valve, you may need to shut off your entire home’s access to water. To do this, find the main shut off valve and turn it clockwise. The main shut off valve is most likely located inside near your water meter.
2
Use a screwdriver to remove the faucet’s indicator button and handle. With a flathead screwdriver, pop off the indicator or index button, which is typically located on the top of the handle. When you take this off, you should see the head of a screw at the center of the handle. Unscrew this screw with your screwdriver, pull off the handle, and set everything aside.^{[7]
X
Research source}
3
Locate the broach at the top of the stem. At this point, the stem should be exposed and you should be able to see the broach. The stem of the faucet is a cylindrical piece that makes up the moving parts on the inside, while the broach is the gear-shaped piece of metal that sits at the top of your faucet’s stem and allows the faucet valve to open and close.^{[8]
X
Research source}
4
Darken 1 spline with a marker. The splines are the pointed ridges that go all the way around the outside of the broach. Use a permanent marker to darken any 1 of the splines so that you can effectively count how many there are.^{[9]
X
Research source}
5
Count all the way around until you end up at the marked spline. Use the marked spline as a starting point. Count each spline and stop when you’ve gotten back to the marked spline. This is the number of splines your broach has.^{[10]
X
Research source}

Method 3

Method 3 of 3:

Identifying by Shape and Size

1
Identify Delta faucets by their " D "shaped broach. Observing this part of your faucet is often a good way to at least narrow down the brand possibilities, as different companies have different broach sizes and shapes. If the broach is " D " shaped, you may have a Delta faucet on your hands.^{[11]
X
Research source}
- Other brands that have " D " shaped brooches include Moen and Mixet.
2
Spot an American Standard faucet by its 22-point broach. This means that the broach at the top of the stem has 22 splines coming off of it. American Standard is one of the more common brands that has this particular number of splines, so if you count 22 points on your broach, your faucet may be an American Standard faucet.^{[12]
X
Research source}
- To double check, measure the broach. If it measures 0.375 inches (0.95 cm), then it’s likely an old American Standard model, and if it measures 0.438 inches (1.11 cm), then it’s likely a current American Standard model.
3
Recognize Fisher faucets by their 0.39 inches (0.99 cm) broaches. Use a ruler or measuring tape to measure your broach. If the measurement is 0.39 inches (0.99 cm), then there’s a good chance that you have a Fisher faucet.^{[13]
X
Research source}
- To double check, count the splines on the broach. Fisher broaches typically have 12-point broaches.
- Some other brands that have broaches that measure 0.39 inches (0.99 cm) include Bradley, Elkay, Sears, and Universal Rundle.
4
Spot a T&S faucet by the bulges on its stem. Unlike most other brands, T&S faucets have pointy-tipped bulges that stick out on either side of the stem. These bulges are located near where the handle meets the stem. If you notice some excess metal sticking out from your faucet in this area, it may be a T&S faucet.^{[14]
X
Research source}
5
Recognize Chicago Faucet faucets by their bullnose-shaped handle. Take a close look at the shape of your faucet handles. If they’re entirely rounded and don’t seem to have any sharp points or edges, your faucet‘s brand is likely Chicago Faucet.^{[15]
X
Research source}

Community Q&A

Question

Where do I find my faucet model number?

Drew Hawkins1

Community Answer

Try checking near the cold water supply line. Check beneath the sink, countertop, or bath rim. Look for a tag connected to the cold water supply line. The tag should contain the model number for your specific faucet. If you can't find it there, try the user manual. Most faucets will come with an instruction booklet or small packet of info. If you still have yours, search through it to see if your model number is listed on it. Another possibility is the actual box or packaging the faucet came in. Check the outside of it for a model number. Some faucets may even have the model number printed right on top of it. While it's less likely, there may just be a model number visible on the faucet instead of a brand name or logo.
Question

How do I find faucet brand logo?

Drew Hawkins1

Community Answer

There are a couple places where the logo could be hiding. Start by cleaning the faucet handles to remove any dirt and grime and see if the logo is there. Check for any words or shapes that could represent a brand. Some brand names and logos on faucets are very small or are etched into inconspicuous parts of the faucet, so you may need to grab a flashlight to get a better look at it. Check around the curves of the faucet and the handles to make sure you aren’t missing a subtle representation of the faucet brand. If you find a number but no brand information on the surface of your faucet, it's likely a model number that you can look up online.
Question

How do you remove a faucet handle?

Drew Hawkins1

Community Answer

Start by turning off the water supply so it doesn't spray everywhere. Kook for a stop valve beneath the sink, tub, or basin and turn it off. Then, use a flathead screwdriver to pop off the indicator or index button, which is typically located on the top of the handle. You should see the head of a screw at the center of the handle. Unscrew this screw with your screwdriver, pull off the handle, and set everything aside. Make sure you don't lose any of the screws or pieces so you can put the handle back on later.