How to Create a Science Project Display Board

Co-authored by Bess Ruff, MA and Jennifer Mueller, JD

Last Updated: March 13, 2023 References

When entering a science fair or completing a science project for a class doing the experiment is just the first part. Once you have finished your experiment, you will have to display the work you did and the results that came from that work. The typical science experiment is displayed on a white tri-fold board and includes many sections. Proper placement of the sections is crucial to the success of your board.

Part 1

Part 1 of 3:

Deciding What Information to Include

1
Title your project. You should choose a catchy, but appropriate title. You want to draw the attention of the judges and visitors to your table, while keeping the integrity of your experiment. The more noticeable you are, the more likely you are to get positive attention.^{[1]
X
Research source}
- A good title might be “Volcanic Explosions” as opposed to just “Volcanoes.”
- When you can, use vivid, specific titles like “Bioluminescence in Crystal Jellyfish” in place of generic titles like “Glowing Jellies.”
2
Include an abstract or a hypothesis. An abstract is a preview of the work that you have done. It introduces your experiment to potentially interested readers. A hypothesis section is a statement that describes what you are going to test.^{[2]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}
- Follow the guidelines of the assignment or fair to know if you need an abstract or a hypothesis section.
- A hypothesis must accurately describe what is to be tested in the experiment, and what the expected outcome is. For example, a statement such as “The baking soda will react with the vinegar in a neutralization reaction, evolving gases and building pressure inside the volcano replica. This pressure will cause fluid to spew from the top of the replica.”
Advertisement
3
Back up your hypothesis with literature. Whether you have a hypothesis section or your hypothesis is included in your abstract, you will still need to justify why you are doing this experiment. This justification comes from showing literature where others have done similar experiments that suggest that your experiment might be of interest. Gather scientific materials related to your project and post them in the literature section on your board. Make sure to follow the proper citation protocol for this section.
- Cite previous experiments that indicate that there is a reason to expect the results that your hypothesis predicts. For example, you could cite a lab experiment that states that acids and bases give off gas when they neutralize each other to support the hypothesis that baking soda and vinegar will go through such a reaction.
4
Post your experimental procedure. The experimental (or procedure) section will detail what you actually did. In this section, you should show the steps you took (in order) and note any significant details such as changes in color, bubbling gases, etc. The procedure section is often the largest section.^{[3]
X
Research source}
5
Show materials that you used. In any experiment, you will use some materials. This section allows you to detail the resources that you used and display them. This is important to show that you understood the products and steps involved in your project, and it makes it easier for anyone interested to replicate the experiment.^{[4]
X
Research source}
6
Highlight your results. The results section should detail what happened during the experiment. Any data that can be shown on charts or graphs should be added to the board in that way. Visuals such as charts and graphs allow visitors to quickly understand your results.^{[5]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}
7
Discuss your conclusions. Your conclusion should tell the reader why your results matter. The conclusions section is not a place to regurgitate your results, but instead you should expand upon them. You can even describe how your results might be relevant to future projects or other areas of science.^{[6]
X
Research source}

Part 2

Part 2 of 3:

Organizing the Information

1
Organize sections from left to right and top to bottom. You should start in the top corner of the leftmost panel. Place sections down the left side, until you get to the bottom. Move to the center panel and do the same. Place your last sections in the rightmost panel moving from top to bottom.
2
Place sections in chronological order. Your introductory section should come first (either the abstract or hypothesis). Next, you should show your literature that justifies the experiment. Follow the literature with the experimental procedures and materials used. End the project with the results and conclusions sections.
3
Use the center to highlight your work. The abstract/hypothesis and literature sections should be on the leftmost panel. Your work is highlighted in the procedure and materials sections that should be placed in the center panel. Your results and conclusion should be placed on the right panel to conclude the board.
4
Display your title front and center. Your title is the attention getter for the entire project. It should be displayed in large letters in the top center of the board. This will maximize the visibility of your project.^{[7]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}
5
Look for balance on your board. You want to use good combinations of colors, for example, white and green go well together.^{[8]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source} It is okay for your fonts to vary a little in size, but try to be consistent with the font style you use. For example, the board’s title should have the largest font, the section titles should be the next largest, and the sections themselves should be typed in the smallest font on the board.
- All fonts should be easily readable. If the font is too small or unclear, this will discourage people from reading the information.
- Use bullet lists, multiple paragraphs, and white space on your board to avoid an overwhelming amount of text.
6
Glue all of your sections to the board. Use a gluestick and trace the perimeter of each item that you will glue to the board. This will help keep corners from pulling away from the board. Press the items firmly onto the board in the place you want them.^{[9]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}
- If you prefer not to use glue, it may sometimes be acceptable to tack items to the board.
- Double sided tape is a good way to stick on things that do not stick well with glue.

Part 3

Part 3 of 3:

Going Above and Beyond

1
Add photos to your board. Pictures will help make your project stand out. Choose photos that are relevant to your experiment, or take your own photos during the experiment. Be sure to read the rules regarding photos. Sometimes, you will be required to provide sources for every photo. You may or may not be allowed to use photos that include yourself (or other people).^{[10]
X
Research source}
2
Bring lab equipment. Again, read the rules first. Your lab equipment can provide a hands on component to the experiment, but it isn’t always allowed. If you used several different pieces of equipment, only bring one or two pieces that are interesting and appropriately sized to fit in front of your board without distracting visitors from your project.^{[11]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}
3
Have your lab notebook handy. Having a notebook is sometimes optional, but other times it is required during the judging process. Your notebook is the first hand account of your experiments and should be kept tediously. Have it with you in case you need to refer back to it to answer a question or provide additional details.^{[12]
X
Trustworthy Source
Science Buddies
Expert-sourced database of science projects, explanations, and educational material
Go to source}

Community Q&A

Question

What is a good checklist for a science project?

Community Answer

Your topic is clearly stated; if there is a problem, list the solution; visual aid; color; easy to read; include pictures; additional specifications made by your teacher.
Question

Would one small mistake mess up the whole project?

Community Answer

It depends on the mistake. If it's a small mistake on the design aspect (i.e. your coloring or image placement looks sloppy) it's probably no big deal. But if you get any information/facts wrong, that could be a big problem.
Question

What should if I do if my conclusion is wrong?

Qamar

Top Answerer

Edit your conclusion or redo the project. Your conclusion is the final result of what you learned and observed from your project. If you feel like you did something wrong, you can redo the project or edit the conclusion to adjust it to the actual outcome.