How to Convert Any Toilet to a Low Flush Toilet

Last Updated: December 23, 2021

Toilets use the most water in our homes. Every day, Americans flush 4.8 billion gallons of water down the toilet. ^{[1]
X
Research source} Reducing the amount of water that your toilet is flushing away will go a long way to saving water in your home and helping to conserve it generally. With one easy adjustment, you'll save money, water and the environment… one flush at a time.

Steps

1
Fill a half gallon container. A plastic bottle (juice/milk) is ideal. Remove any paper or plastic label on the outside of the container. Fill it at least partially with pebbles, sand, or gravel - whatever is handy. Then add water if more weight is needed. If you just fill it with water, though, the container will move around in the tank and interfere with the mechanism.
2
Place the container in the tank of the toilet.

Advertisement
3
Carefully lower it into the water.
4
Replace the lid of the tank.
5
Flush away. The New York Times reported that a sealed half gallon container will save half a gallon on each flush. If you, like most Americans, flush 5 times daily, your family of 5 will save 350 gallons (1325 liters) of water every month ^{[2]
X
Research source}. These savings will significantly cut your water bill, too.
6
Send this article to your friends. Such an easy answer to saving money and protecting our water supplies is something to share around!

Community Q&A

Question

How do I save water per flush on a toilet?

Community Answer

In addition to a low-flush toilet, you may want to consider a product called Sink Twice, which uses the soapy water from washing hands and brushing teeth in the toilet tank to flush with, and makes most toilets more efficient using fill cycle diversion.
Question

Can an existing flushing mechanism be converted to low-flush without changing the toilet?

Community Answer

No. It's best, easiest, and least invasive to limit the amount of water used for a flush. Messing with the flush valve can ruin the toilet's overall performance.
Question

A floating thing will not be flushed properly with a low volume of water. What should I do?

Community Answer

Take the filled bottle out of the tank and let the tank fill to the proper volume before flushing.

Warnings

Make sure the bottle does not interfere with any of the moving parts in the tank.

⧼thumbs_response⧽
Helpful 36 Not Helpful 12
Don't put a brick in the tank unless you know it's one that won't break down after a long time in the water. The brick may dissolve and particles of it can clog and possibly seal off the drain.

⧼thumbs_response⧽
Helpful 26 Not Helpful 13
If you use water to fill the container, a couple of drops of bleach added to the water will help keep it from growing gunk inside.

⧼thumbs_response⧽
Helpful 18 Not Helpful 18
If you find your toilet is not flushing properly, with waste remaining in the toilet and water ending up on the floor, take the bottle out. Not all toilets can flush properly with a reduced quantity of water. Consider installing a low flush toilet.

⧼thumbs_response⧽
Helpful 0 Not Helpful 0
Many plumbers do not recommend this modification. Low flush toilets are designed differently, and less water flushing in a toilet not meant to do so can mean more frequent clogs, overflows, and extra flushing to remove the same amount of waste. (Which can waste more water than you are saving)

⧼thumbs_response⧽
Helpful 0 Not Helpful 0
A leaking toilet can waste up to 250 gallons (946 litres) of water a day^{[4]
X
Research source}. To see if your toilet is leaking, place a few drops of food coloring in the tank and wait for half an hour. Check the bowl - if the food coloring appears, you have a leak. Get a plumber to come and fix it. ^{[5]
X
Research source}

⧼thumbs_response⧽
Helpful 0 Not Helpful 0