X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 9 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 60,735 times.
Learn more...
You might enjoy wrestling. Part of this is building a wrestling ring, which can be done with a few simple steps.
Steps
-
1Make sure that wherever you're going to build your ring, you make sure that you have enough room. Also, think about the size of your audience. Will it be large or small?[1]
-
2Gather metal poles, plywood, some tires and tarps. Most of these items can either be purchased or if possible maybe a junkyard for the like say the tires.Advertisement
-
3Start by using the plywood create like a bed. Make sure that you use enough plywood so it's high enough.
-
4Fill that bed with rubber tires. Once the bed is full, put a layer of something soft like a bunch of old blankets or a lot of towels, and put them over the tires.[2]
-
5Cover the bed with a tarp and nail it into the wooden sides of the ring.[3]
-
6Grab four metal poles and set them at each corner of the ring. Then, connect them to the sides of the ring in the corners.[4]
-
7Get some rope, drill and screws. Using a drill, screw in eye hooks into the ring posts (three in each post).
-
8Make a square. After all hooks are attached using a bunch or rope, thread it through the eye hook all the way around the ring, creating a square.[5]
-
9Tie the ropes off and you are ready to rumble!
Advertisement
Community Q&A
-
QuestionCan this be built outside?Community AnswerYes, it can, just be sure to put a runway for the superstars, a barricade, and the stands.
-
QuestionIf I put the tires on the plywood, and some blankets and the tarp, wouldn't it fall through the tire holes?Community AnswerYes. Use mattresses, then put a thin piece of wood over the mattresses. Layer some softer materials such as blankets. You can also box in the mattresses with wood all the way around, and just drill them together.
-
QuestionHow much does it cost to build a cheap wrestling ring?Community AnswerNormally, it will cost up to $300 just to produce a wrestling ring. You should definitely look into how much the mats cost, as well as the ropes. Wrestling Mart is a good store that sells all the things that you will need to build a cheap wrestling ring.
Advertisement
Things You'll Need
- Rope
- Drill
- Screws
- Blankets
- Towels
References
About This Article
Advertisement