Playing the flute can be both rewarding for you and entertaining for others, but only if you produce a pleasing sound! Knowing a little about how to hold your flute, how to shape your mouth while playing, and how to use your breath will make playing your flute as fun and satisfying as possible.

Part 1
Part 1 of 2:

Holding Your Flute

  1. 1
    Remove the head joint from the rest of the flute. Your flute may disassemble, in which case you should use only the head joint (the end piece you blow into). Don't worry if your flute is one piece though, you can still practice comfortably with a full flute by simply leaving your fingers off of the holes.[1]
  2. 2
    Raise the flute to your lips from the direction of your chin. Bring the flute toward your mouth, from beneath it, with the holes facing up and the keys (or where the keys would be if you removed the head joint) on your right side.[2]
    • Hold the flute horizontally and to your right.[3]
    • The hole you blow into should be facing upward.
    • If you are practicing with a full flute, hold it with your left hand closest to your mouth, the palm facing you, and your right hand on the farther part of the flute with your palm facing out.[4] Balance the flute using both hands without covering any of the holes or pressing any keys.
    Advertisement
  3. 3
    Position the flute below your mouth. The lip plate should rest gently in the place where your lip and chin meet. This will leave your bottom lip covering part of the hole in the flute, but be sure it is not too much, as you still need enough space to push your breath through the top and bottom of the opposite edge.[5]
  4. Advertisement
Part 2
Part 2 of 2:

Shaping Your Mouth Correctly

  1. 1
    Press the corners of your mouth together, leaving an oval shaped hole. Without changing the position of your bottom lip, press the sides of your mouth together, leaving a small hole in the center through which you will blow over your flute.[6]
    • It may be difficult to purse your lips without moving your bottom lip, feel free to readjust your flute after positioning your lips.
    • The opening between your lips should be centered over the hole in your flute, even if the opening is not directly in the center of your mouth.[7]
  2. 2
    Extend your top lip slightly past your bottom lip. You will blow down yet over the flute using your top lip to control the direction of your breath. [8]
  3. 3
    Blow into your flute just as you would blow to whistle. You won't really blow into the hole, but over the edge of the hole through pursed lips using steady pressure.[9] Hopefully, this will produce a clear note on your first attempt, but do not become discouraged if it doesn't. Simply pay attention to what sounds best and try to replicate what you were doing when you made a pleasing sound.
  4. 4
    Experiment with your mouth shape and breath. Making small adjustments to the angle of your lips and the direction and pressure of your breath can significantly improve the tone and quality of the note you produce. You are looking for a clear, sustainable, and steady tone.[10]
    • Focus the stream of air you exhale first on one corner of the hole, then the other. Listen to the sound and remember where you were blowing when the note was most clear.[11]
    • Try breathing more softly or with more force. Pay attention to what sounds best and try to use the same amount of pressure as you continue practicing.
    • Rotate your flute very slightly while blowing (and listening) to ensure your bottom lip is not covering too much of the hole.[12]
  5. Advertisement

Community Q&A

  • Question
    I have to play the flute for our school band, but I have braces, will I still be able to play it?
    Community Answer
    Community Answer
    Yes. Playing the flute has more to do with the shape you make with your lips, the amount of air blown and direction of the air blowing (a.k.a. embouchure), and braces won't affect tone production at all.
  • Question
    I can't seem to find the exact location to get a good tone. How can I fix this?
    Daidra Thomander
    Daidra Thomander
    Community Answer
    Keep trying, and when you do find a good lip posture, blow long tones to fix it into muscle memory. Remember, the lower the note, the more relaxed your lips are. The higher the note, the more tightened they are.
  • Question
    After I take the flute away from my mouth, I find a little bit of condensation on the other side of the hole, like fog on a mirror. Is this supposed to be there, and if not, how can I fix it?
    FlowerPower 💖
    FlowerPower 💖
    Community Answer
    Condensation is normal after playing the flute, though it's best to clean it after practicing.
Advertisement

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 49,210 times.
4 votes - 80%
Co-authors: 3
Updated: September 3, 2020
Views: 49,210
Categories: Flute
Article SummaryX

To blow into a flute, first, hold the flute slightly under your lips with the holes facing up and the keys on your right side. Make sure the lip plate rests gently where your lip and chin meet so your bottom lip is only covering part of the hole. Once your flute is in place, press the sides of your mouth together without changing the position of your bottom lip, turning your mouth into an oval. From there, extend your top lip slightly past your bottom lip to direct your breath downward over the flute. Then, blow over the edge of the flute hole through your pursed lips with steady pressure. Don’t get discouraged if you don’t get a clear note on your first try. Keep trying and you’ll eventually get it! For more tips, like how to adjust your lips to get different sounds, read on.

Did this summary help you?
Advertisement