How to Apply a Hair Relaxer

Last Updated: September 16, 2021 References Approved

Hair relaxer, otherwise known as hair straightener, is used on hair that is naturally curly or wavy in order to attain a straighter, sleeker look. Caution should be used when relaxing hair, because of the chemicals that are used. To properly relax your hair, choose a relaxer, prepare your hair, apply the relaxer, remove the relaxer, and then adopt a haircare routine.

Part 1

Part 1 of 5:

Choosing a Relaxer

1
Get a no-lye relaxer if you have a sensitive scalp. There are two main types of relaxers, lye and no-lye. Both of these have benefits and drawbacks, but those with sensitive scalps should go with the no-lye because it’s less painful and irritating.
- However, no-lye relaxers often dry out the hair. For this reason, those who don’t have sensitive scalps should consider using a lye relaxer.^{[1]
  X
  Research source}
2
Go with a regular strength relaxer for normal to thick, coarse hair. Different relaxers have different strengths. Pick a relaxer strength based on your hair’s thickness and texture. For most, a “regular” strength relaxer should work just fine.
- Get a relaxer with mild strength if your hair is fine, color-treated, or damaged.
- If you have thick, coarse hair, you can try a “super” strength relaxer. Make sure to apply it as directed in the instructions, as improperly used relaxers can cause breakage.^{[2]
  X
  Research source}
Advertisement
3
Read the relaxer directions. Read the directions on your relaxer kit thoroughly and make sure you understand everything. While relaxing your hair is relatively simple, it can also be dangerous. Ensure your own safety by carefully reading through the instructions and warnings.^{[3]
X
Research source}

Part 2

Part 2 of 5:

Preparing Your Hair

1
Don’t shampoo or scratch your scalp before relaxing your hair. Applying relaxer will be painful if your scalp is already irritated in any way. For this reason, it’s best to not wash your hair or scratch your head at all for at least the week leading up to application.^{[4]
X
Research source}
- If you do accidentally scratch your scalp, the relaxer will likely make your head tingle.
2
Put on gloves and a cape. You’ll be working with dangerous chemicals that can harm your skin and possibly damage your clothes. Get a hairdresser’s cape and plastic gloves and put them on before handling the relaxer to prevent any harm or damage.^{[5]
X
Research source}
3
Get out a couple of towels in case of spills. Keep a towel or two on standby in case you have any spills. The chemicals you’re dealing with may stain clothing, furniture, and other things they touch, so it’s best to clean any spills up immediately.^{[6]
X
Research source}
4
Apply a protective base cream to the scalp and hairline. Because relaxer can irritate your skin, it’s a great idea to apply a base cream directly to the scalp to protect it. Part your hair in multiple places and apply the base to your scalp. Don’t forget to apply the base to your hairline and around your ears as well.^{[7]
X
Research source}
- Petroleum jelly is also a sufficient protective base option.
5
Divide your hair into 4-6 sections. Use a comb to divide your hair evenly into 4-6 different sections. Secure the sections with plastic hair clips or rubber bands. Avoid any hair ties or clips that have metal.^{[8]
X
Research source}

Part 3

Part 3 of 5:

Applying the Relaxer

1
Mix the product in a plastic bowl. Typically, hair relaxer comes as a cream or paste and there will be chemicals that need to be mixed with it to complete the relaxer chemical process. With your plastic gloves on, mix the product in a plastic bowl as instructed.
2
Apply the relaxer to the new growth in small sections. Use your comb or the opposite end of your applicator brush to get a small section of hair that’s no more than ½ inch (1.3 cm) thick. Using an applicator brush, carefully coat your new growth with the relaxer. Do this over and over until you’ve applied it to every section.^{[9]
X
Research source}
- If you’ve never applied relaxer before, you’ll be coating all of your hair. If you have, then you should only be applying it to your roots.
- Avoid getting the relaxer on your scalp.
- Don’t apply the relaxer to the parts of your hair that aren’t new growth. You’ll over-process the hair and may cause damage.
3
Apply relaxer to your nape and hairline last. Your hairline is the area that people will see first when they look at you, so you want to be extra sure that you don’t over-process the relaxer along the hairline. Also wait to apply relaxer to the nape of your neck, because the hair here tends to process more quickly. Over-processing may result in unsightly breakage.^{[10]
X
Research source}
4
Smooth the new growth with the back of a comb. After applying your relaxer, go back over all of the hair you applied relaxer to. Use the back of a comb to smooth out the hair to ensure that it straightens.
- Do not comb the hair.^{[11]
  X
  Research source}
5
Set a timer for 10 or 15 minutes. While most relaxers should be left on for 10-15 minutes, different relaxers require waiting different amounts of time. Set a timer for however long the box instructs. Strictly follow the time instruction.^{[12]
X
Research source}
- Some people leave the relaxer on longer to achieve “bone straight” hair, but it’s typically more attractive to take the product off when you’re supposed to because then your hair will have some body. Also, leaving it on too long can damage your hair.

Part 4

Part 4 of 5:

Removing the Relaxer

1
Rinse your hair for at least 5-7 minutes. When the time is up, spend several minutes rinsing the relaxer out with comfortably hot water. In order to protect your hair, it’s important to get as much product as possible out of your hair. Don’t spend any less than 5 minutes rinsing.^{[13]
X
Research source}
2
Condition your hair. After rinsing, massage a regular moisturizing conditioner into your wet hair and then rinse it out just after application. This will bring the pH level of your hair back up to normal.^{[14]
X
Research source} It’s important to do this before shampooing while the hair cuticle is open. The conditioner will moisturize your hair much more effectively when the cuticle is open.^{[15]
X
Research source}
3
Wash your hair with a neutralizing shampoo. Finally, wash your hair with a neutralizing shampoo to stop the chemical process. This will ensure that the relaxer is completely removed from your hair.^{[16]
X
Research source}
4
Rinse your hair and style as usual. Thoroughly rinse the neutralizing shampoo out of your hair and then spray with a heat protectant and blow your hair dry with a hair dryer if you wish. Then, you can finish styling your hair however you want to. Complete the sleek look by straightening with a flat iron.

Part 5

Part 5 of 5:

Caring for Relaxed Hair

1
Relax your roots every 8-10 weeks. If you want to stick with the sleeker look of relaxed hair, you’ll need to apply the relaxer every 8-10 weeks. Every time you do this, make sure you only apply relaxer to your new growth. Otherwise, you’ll damage your hair.^{[17]
X
Research source}
2
Keep your hair moisturized. All relaxers tend to dry out hair to some degree. Moisturize your hair daily with leave-in conditioners and deep-penetrating light oils to keep your hair soft, silky, and smooth.
- Deep condition your hair weekly with a protein treatment or moisturizing mask.^{[18]
  X
  Research source}
3
Use a sulfate-free shampoo. Shampoos that contain sulfate strip your hair of its natural oils, which dries it out. Make sure to shampoo with a gentle sulfate-free shampoo instead so that your hair retains as much moisture as possible.^{[19]
X
Research source}
4
Get your hair trimmed every 6-8 weeks. When you relax your hair, the ends often become porous and fragile, which means you’ll be more susceptible to getting split ends. To keep your hair healthy, get your hair trimmed at least every 6-8 weeks, or whenever you notice that your ends are beginning to look frayed.^{[20]
X
Research source}
5
Limit your use of heat styling tools. Heat styling tools such as flat irons and curling irons can weaken your hair, making it more prone to breaking and becoming damaged. Try to limit your use of heat styling tools as much as you can.^{[21]
X
Research source}

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

What should I do if I just want to grow my hair naturally?

Ndeye Anta Niang
Hair Stylist & Master Braider
Ndeye Anta Niang is a Hair Stylist, Master Braider, and Founder of AntaBraids, a traveling braiding service based in New York City. Ndeye has over 20 years of experience in African hair including braiding box braids, Senegalese twists, crochet braids, faux dread locs, goddess locs, kinky twists, and lakhass braids. Ndeye was the first female of her tribe in Africa to move to America and is now sharing her knowledge of African braids passed on from generation to generation.

Ndeye Anta Niang

Hair Stylist & Master Braider

Expert Answer

Support wikiHow by unlocking this expert answer.

Keep your hair clean and wash it regularly. Deep condition your hair every once a week or so and use a detangler to keep your hair from knotting up. Protect your hair when you go to bed if you have braids by wrapping it up in a ponytail or scarf. Other than that, just take it easy with the heat and don't overdo it with the product!
Question

How long should you leave a relaxer in your hair?

Laura Martin
Licensed Cosmetologist
Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.

Laura Martin

Licensed Cosmetologist

Expert Answer

Support wikiHow by unlocking this expert answer.

This depends on your hair texture. Coarse hair can take a slightly longer processing time, but you should never leave it on for longer than 15 minutes and this time starts when you begin the application.
Question

How often are you supposed to relax your hair?

Laura Martin
Licensed Cosmetologist
Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.

Laura Martin

Licensed Cosmetologist

Expert Answer

Support wikiHow by unlocking this expert answer.

You should never overlap a relaxer, that is, don't apply it to previously relaxed hair. You should touch up the roots every 8-12 weeks.

Warnings

Never apply hair relaxer to hair that has been lightened. The chemical reactions between the relaxer and the bleach in a hair lightening product could result in hair loss due to burning.

⧼thumbs_response⧽
Helpful 1 Not Helpful 1